Kenwood 6x9's

[ALERO81]

Hey guys I need a little help here I bought a set of Kenwood 6x9's about 4 months ago I had them all wired up ..(did it myself ) they sounded great
I had to disconnect them about 3 months ago to use the amp they were running on so they have just been sitting in the car NOT WIRED UP .. I know it was dumb anyway I went to wire them up and now I cant hear much from them at all any Idea ??
Please don't ask dumb questions I have done this before with no problems

[darksobsession]

melted in the sun?

lemons?

since you don't want dumb questions like 'did you wire them correctly?' (and assuming you did) we can't really help you other than speculate.

user issues? jk.

i know when i installed mine it took a few tries to be able to crimp the wires together and get them to stay that way. just check your connections, all the basic stuff. maybe you dialed your amp down?

wait for one of the audio guys to post.

[Fi-Alero]

Did you wire them up correctly? It is always good to triple check this.
Also check your gain on the amp, along with the filters to make sure they are set right.

[ALERO81]

Originally Posted by darksobsession

melted in the sun?

lemons?

since you don't want dumb questions like 'did you wire them correctly?' (and assuming you did) we can't really help you other than speculate.

user issues? jk.

i know when i installed mine it took a few tries to be able to crimp the wires together and get them to stay that way. just check your connections, all the basic stuff. maybe you dialed your amp down?

wait for one of the audio guys to post.

I dont know I will have to look at them again tonight to see what is going on with them the speakers look fine .....they cant really melt in the sun can they ??