02-12-2007, 12:17 PM
|
#21
|
GX Member
Join Date: Nov 2003
Posts: 25
|
I used to have the same problem, the e brake didnt want to turn off, and the cruise didnt want to work. i checked the brake fuild and it was fine, the problem was, with my car, inside the brake fuild container there is a float with a little metal piece. well it turns out my float didnt float, all i had to do was to remove that float and i have never had a problem with it since. so check that out also.
__________________
2001 GLS
|
|
|
02-12-2007, 12:31 PM
|
#22
|
Moderator
Join Date: Nov 2004
Location: Long Grove, IL
Posts: 5,002
|
Quote:
Originally Posted by SweetNLow
i was actually reading about the warped rotors the other day....... its more of a oem pad issue than the rotors
|
That is most definitely the case. With the OEM pads, under certain occasions you can get a build-up of pad material stuck on the rotor in areas, and that is what the pulsation is. I noticed this a few times on my Alero, a good firm stop got rid of it every time. I haven't had it since with my upgraded brakes though. Rotors RARELY warp.
__________________
Cliff Scott
2004 Alero GX w/sport pkg - Sold, living somewhere in WI now.
2011 Saab 9-5 Turbo4 M6
2004 Corvette Convertible M6
1994 Chevy Beretta - Quad4/M5
|
|
|
02-12-2007, 10:14 PM
|
#23
|
GX Member
Join Date: Nov 2006
Location: Calgary Alberta Canada
Posts: 194
|
Quote:
Originally Posted by ziaplayboy
I used to have the same problem, the e brake didnt want to turn off, and the cruise didnt want to work. i checked the brake fuild and it was fine, the problem was, with my car, inside the brake fuild container there is a float with a little metal piece. well it turns out my float didnt float, all i had to do was to remove that float and i have never had a problem with it since. so check that out also.
|
BINGO! thanks man,float was stuck,I got it unstuck and every things good now Ill keep an eye on it to see if it keeps it sticking.
|
|
|
02-12-2007, 10:20 PM
|
#24
|
GX Member
Join Date: Nov 2006
Location: Calgary Alberta Canada
Posts: 194
|
Quote:
Originally Posted by Cliff8928
That is most definitely the case. With the OEM pads, under certain occasions you can get a build-up of pad material stuck on the rotor in areas, and that is what the pulsation is. I noticed this a few times on my Alero, a good firm stop got rid of it every time. I haven't had it since with my upgraded brakes though. Rotors RARELY warp.
|
Good to know,as soon as the 5 inches of snow melts Ill give it a shot.Do you think a good set of ceramic pads would help?
|
|
|
02-12-2007, 10:34 PM
|
#25
|
GX Member
Join Date: Nov 2006
Location: Calgary Alberta Canada
Posts: 194
|
Quote:
Originally Posted by Cliff8928
That is most definitely the case. With the OEM pads, under certain occasions you can get a build-up of pad material stuck on the rotor in areas, and that is what the pulsation is. I noticed this a few times on my Alero, a good firm stop got rid of it every time. I haven't had it since with my upgraded brakes though. Rotors RARELY warp.
|
Good to know,as soon as the 5 inches of snow melts Ill give it a shot.Do you think a good set of ceramic pads would help?
|
|
|
02-12-2007, 10:39 PM
|
#26
|
Premier V.I.P. Member
Join Date: Jan 2006
Location: Pekin, IL.
Posts: 1,233
|
holy triple post
__________________
2008 Chevrolet Silverado 1500 LT1 Z71/4x4
2000 Oldsmobile Alero GLS - Sold
-------------------------------------------------------
|
|
|
02-13-2007, 12:26 AM
|
#27
|
GX Member
Join Date: Nov 2006
Location: Calgary Alberta Canada
Posts: 194
|
Yeah sorry I talk alot.LOL.But I only meant to post that last one once.
|
|
|
02-13-2007, 12:43 AM
|
#28
|
V.I.P. Punching Bag
Join Date: Jan 2006
Location: Lethbridge, Alberta Canada
Posts: 4,313
|
Quote:
Originally Posted by Wreckless
Good to know,as soon as the 5 inches of snow melts Ill give it a shot.Do you think a good set of ceramic pads would help?
|
well, i have both ceramic pads and cross/slotted rotors and i NEVER ride my brake hard and my rotors are already starting to get warped again and its only been 9 months. was thinking about doing a complete brake upgrade but thats a little bit on the expensive side. to make it short, either my pads were just low quality (or my rotors - R1 Concept) or its my luck lol
|
|
|
02-13-2007, 01:14 AM
|
#29
|
GLS member
Join Date: Oct 2005
Location: way up in ya
Posts: 2,195
|
how do you know they are warped?
i have cross drilled and slotted with semi metallic pads and have NEVER had an issue
__________________
joelsoundxtreme: u faggot
sweetnlow: takes one to know one
joelsoundxtreme: you know it cupcake
|
|
|
02-13-2007, 01:46 AM
|
#30
|
Moderator
Join Date: Nov 2004
Location: Long Grove, IL
Posts: 5,002
|
I also noticed, the easier i was on my brakes, the more prone they were to vibration...
__________________
Cliff Scott
2004 Alero GX w/sport pkg - Sold, living somewhere in WI now.
2011 Saab 9-5 Turbo4 M6
2004 Corvette Convertible M6
1994 Chevy Beretta - Quad4/M5
|
|
|
02-13-2007, 01:51 AM
|
#31
|
GLS member
Join Date: Dec 2006
Location: Montreal, Qc, Canada
Posts: 1,876
|
Quote:
Originally Posted by Satsuriku
well, i have both ceramic pads and cross/slotted rotors and i NEVER ride my brake hard and my rotors are already starting to get warped again and its only been 9 months. was thinking about doing a complete brake upgrade but thats a little bit on the expensive side. to make it short, either my pads were just low quality (or my rotors - R1 Concept) or its my luck lol
|
Are the rotors a appearence mod for you? If not, why would you get cross/slotted rotors if you are not going to even use them for what they are ment to be?
__________________
2 door 2000 Black GX With a stick: M45 eaton supercharger - Quad4's 57mm Throttle body - Custom WAI - KYB GR-2 struts - CM Lowering springs - Front and rear strut tower brace - R1 concept zinc plated drilled/slotted rotors with semi-metallic pads - short shifter.
Quote:
Originally Posted by Alerosaint
the #6 bolt torque..its impossible to get...unless I use telekenesis
|
|
|
|
02-22-2007, 02:03 PM
|
#32
|
GLS member
Join Date: Feb 2007
Location: Regina, SK
Posts: 1,215
|
I had a similar issue with my Alero. The brakepads/rotors wore out pre-maturely. Took it in to the shop and had them put on Wagner rotors and brakepads all around. Been 5 months and haven't had an issue yet. I also find the stopping is more responsive.
|
|
|
07-31-2008, 10:11 PM
|
#33
|
on vacation
Join Date: Aug 2006
Location: that way
Posts: 2,169
|
BRAKE light
searching teh phorumz to find what you seek ftw. LOL BUMPZ LOL (this thread's title needs to be changed btw.)
erm.
about this "float" thing- I know it's suppose to be located INSIDE the brake fluid reservoir.. but I've never noticed a float inside mine O_o
gonna give it a once-over tomorrow and see what I can find out.. hopefully the fluid is just low. and for those of you who dont realize.. yes my brake light is coming on for what seems to be no apparent reason.. I can lock up all 4 tires (tried it.. never done it before.. the alero can stop on a frickin' dime) so i'm going to assume theres nothing wrong with the brakes themselves..
no "OMG THREAD JEZUZ" crap.. this thread has useful information- beats starting another thread.
edit: this post was made at 9:11 ... i've been seeing this time alot lately both morning and evening
__________________
WILL NEVER FORGET
Last edited by Midgear : 07-31-2008 at 10:23 PM.
|
|
|
07-31-2008, 10:23 PM
|
#34
|
GL Member
Join Date: May 2007
Location: Glenview/Riverwoods IL
Posts: 408
|
Quote:
Originally Posted by Wreckless
Maybe Ill trade it in on your MOM, SweetNLow says shes a good ride.
|
haha i dont think he caught that yet
|
|
|
07-31-2008, 10:46 PM
|
#35
|
Gone
Join Date: Mar 2004
Location: Lockport Ny
Posts: 19,244
|
Quote:
Originally Posted by Midgear
searching teh phorumz to find what you seek ftw. LOL BUMPZ LOL (this thread's title needs to be changed btw.)
erm.
about this "float" thing- I know it's suppose to be located INSIDE the brake fluid reservoir.. but I've never noticed a float inside mine O_o
gonna give it a once-over tomorrow and see what I can find out.. hopefully the fluid is just low. and for those of you who dont realize.. yes my brake light is coming on for what seems to be no apparent reason.. I can lock up all 4 tires (tried it.. never done it before.. the alero can stop on a frickin' dime) so i'm going to assume theres nothing wrong with the brakes themselves..
no "OMG THREAD JEZUZ" crap.. this thread has useful information- beats starting another thread.
edit: this post was made at 9:11 ... i've been seeing this time alot lately both morning and evening
|
the "float" looks like a little nerf yellow cylinder inside the brake fluid reservoir.
|
|
|
07-31-2008, 10:49 PM
|
#36
|
on vacation
Join Date: Aug 2006
Location: that way
Posts: 2,169
|
Quote:
Originally Posted by cherrington17
the "float" looks like a little nerf yellow cylinder inside the brake fluid reservoir.
|
hmm.. never noticed one in there.. i'll check it out and letchya know-
__________________
WILL NEVER FORGET
|
|
|
08-01-2008, 01:36 AM
|
#37
|
Moderator
Join Date: Nov 2004
Location: Long Grove, IL
Posts: 5,002
|
The level can also drop (causing the light to come on) if your pads are REALLY worn.
__________________
Cliff Scott
2004 Alero GX w/sport pkg - Sold, living somewhere in WI now.
2011 Saab 9-5 Turbo4 M6
2004 Corvette Convertible M6
1994 Chevy Beretta - Quad4/M5
|
|
|
08-01-2008, 04:55 PM
|
#38
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
OK I'm going to lock this thread.
The reason why is this thread was last active during the "Alero bashing" era.
"I don't understand!! What a POS!! A car I have to take care of"
I was tired of it then, I'm still tired of it now.
Not happy with your Alero after 6 years of ownership and you ACTUALY have to do some work to it. Go ahead and buy a car that YOU think you won't have to do ANY maintance to
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 11:49 PM.
|