Aleromod.com Aleromod.com

Go Back   Aleromod.com > Performance Related > LD9 2.4L Twin Cam Specific

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-05-2012, 07:45 PM   #1
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
What does rod knock sound like?

My 2.4 has a odd knock when the engine is cold, at idle (around 800rpm). I only hear this noise from somewhere in the bottom end. Def not near the lifters or valve train.When the engine is fully warm i do not hear the noise at idle (550 rpm). However, when im driving and and the engine is under load and at about 4000-5000rpm i hear a very quick and faintnt ticking/knocking. What could be these noises? This noise eventually goes away and cant hear it again until the engine cools down.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-05-2012, 07:52 PM   #2
JLw7123
i speed up for corners
 
JLw7123's Avatar
 
Join Date: Apr 2009
Location: Dover,NH
Posts: 3,489
JLw7123 is on a distinguished road
Send a message via AIM to JLw7123 Send a message via Yahoo to JLw7123 Send a message via Skype™ to JLw7123
piston slap?
__________________
[SIGPIC]
Alero is gone but not forgotten
1999 black gls coupe R.I.P 130k
1999 auburn mist metallic gls sedan R.I.P
2005 Subaru legacy 2.5i 190k. New rims and tires for summer.
JLw7123 is offline   Reply With Quote
Old 01-05-2012, 07:56 PM   #3
comanche
V.I.P. Member
 
Join Date: Jul 2004
Location: Kalamazoo, MI
Posts: 477
comanche is an unknown quantity at this point
Generally sounds like a clatter coming from the guts/lower end of the engine.
But usually when a rod bearing goes, the noise is a pretty loud clatter that won't go away but gets slightly better when the engine is revved.

With a 2.4L it's inevitable if the engine hasn't been taken care of...
comanche is offline   Reply With Quote
Old 01-05-2012, 09:18 PM   #4
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Its well taken care of. Oil changes at regular intervals with synthetic oil.

I suppose it could be piston slap, however i didnt know that 2.4 was known for piaton slap.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-12-2012, 07:56 AM   #5
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Bump.

Any ideas as to what this noise could be? Its getting louder when its cold but goes away when the engine is warm.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-12-2012, 09:29 AM   #6
rocketfast321
GL Member
 
rocketfast321's Avatar
 
Join Date: Jul 2011
Location: Montgomery,Al
Posts: 308
rocketfast321 is on a distinguished road
kind of hard to say, i know my 2.4 makes some weird sounds when its cold, but i don't worry about it.
__________________
Quote:
Originally Posted by xXManwhoreXx View Post
I could never actually get rid of the alero as much as I hate it some times
Baby Sandy: 2001 2.4 Grand Am se 1.5 (auto) 32k-119k : Sept.2002-Aug.2010
Mickey: 2001 Alero GL 2.4 5-speed (Nov. 2010) 109k-???
rocketfast321 is offline   Reply With Quote
Old 01-12-2012, 12:36 PM   #7
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Could it even be piston slap? I swear all of the noise is from the bottom end.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-12-2012, 02:11 PM   #8
comanche
V.I.P. Member
 
Join Date: Jul 2004
Location: Kalamazoo, MI
Posts: 477
comanche is an unknown quantity at this point
What I do when I have a noise with a 2.4L is carefully pull the oil drain plug and put my finger in its place while I check the plug for shavings.

Most of the time I have found that a lower end noise in a 2.4L is caused by bad bearings. These aren't the best engines (understatement)
comanche is offline   Reply With Quote
Old 01-12-2012, 02:48 PM   #9
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Well I have a magnetic oil drain plug so I see a good amount of metal shavings on the plug.

But waht does it mean if the noise goes away once the engine is warm? Rod knocks dont do that do they?
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-12-2012, 03:38 PM   #10
sleepyalero
GLS member
 
sleepyalero's Avatar
 
Join Date: Aug 2010
Location: indy
Posts: 8,411
sleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond repute
its most likely just piston slap. i wouldnt worry about it, mines noisy too when cold.
__________________
[SIGPIC]
[SIGPIC]
S. . .L. . . E . . .E. . .P. . .Y. . .IS A TRAITOR--HE GOT BORED SO HE SOLD ME AFTER HAVING AN AFFAIR WITH A RICE ROCKET
Oldsnut is my Hero!
Meet Destiny, shes a 2001 Oldsmobile Alero GLS, F40 6MT swap. (#2 of 3)
2/24/14 - 200,000 miles body/motor. 22,300 on F40.
Quote:
Originally Posted by Oldsnut View Post
He would Plasti Dip his pecker if he could.
Quote:
Originally Posted by tipnitty View Post
A girl touched my Pee Pee. So you can say things are getting pretty serious for me.
sleepyalero is offline   Reply With Quote
Old 01-12-2012, 05:11 PM   #11
comanche
V.I.P. Member
 
Join Date: Jul 2004
Location: Kalamazoo, MI
Posts: 477
comanche is an unknown quantity at this point
Rod knocks still have a very distinct clatter once the engine warms up, though revving at the right rpms can almost make you think it is getting better.

I guess the best thing you can do is post upload a sound file.
comanche is offline   Reply With Quote
Old 01-12-2012, 06:28 PM   #12
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Hmmmm well I had the car up on ramps tonight and the noise was all on the bottom end is somewhere underneath, near the drivers side. Right at the no. 3 piston it seems... But this noise gets quieter as the engine warms up and when its fully warm its nearly gone.

I'll try to get a video of it soon.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-12-2012, 07:39 PM   #13
a.graham52
Premier V.I.P. Member
 
a.graham52's Avatar
 
Join Date: Dec 2009
Location: New Hampshire
Posts: 1,979
a.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond reputea.graham52 has a reputation beyond repute
Send a message via MSN to a.graham52
u might want to put some thought into what ur doing. ur putting secret cams into an engine with a potential lower end problem....
__________________
The dumbass that shows up randomly 10 years after selling the car.
a.graham52 is offline   Reply With Quote
Old 01-12-2012, 07:57 PM   #14
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Yeah Ive though about it. But the noise just started to get worse today as it was about 30 degrees for the first time in months when I started it up. So it could be the extreme cold and just be something simple as piston slap.

Its extremely hard to tell where exactly the noise is coming from. With my head underneath the oil pan I hear it the loudest on the drivers side. Like either no. 3 or 4. But near the passenger side it sounds the same almost, just not as loud.

It almost sounds like something is shaking loose and taping on something. I listened to 2.4 rod knock vids on Youtube and it sounds nowhere near as loud or as bad as that.

The oil was just changed and I drove it around pretty hard and got back and put it on ramps and the noise is either completely gone or so quiet I cant hear it over the rest of the engine noises when its warm.

Are the pistons aluminum in the 2.4? I would imagine so right? So it could be piston slap. The only engine I have heard with a audible piston slap was my dads 5.7L LS1 in his Camaro. That sounded like a diesel until it was fully warm.
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-21-2012, 10:28 AM   #15
Philbar71
GL Member
 
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
Philbar71 is on a distinguished road
Well, its got to be piston slap. We had a day or two of warm weather where it was near 70 and i didnt hear any knock when cold. When warmed up its quiet as well.

But as soon as the temp drops below 60 it knocks when the engine is cold -_-
__________________
01 Alero 2.4 - Just minor mods...
Philbar71 is offline   Reply With Quote
Old 01-21-2012, 12:34 PM   #16
xXManwhoreXx
GLS member
 
xXManwhoreXx's Avatar
 
Join Date: Nov 2007
Location: Indiana
Posts: 3,201
xXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond reputexXManwhoreXx has a reputation beyond repute
Its piston slap guarenteed. I dont know much about the 2.4s but im guessing cast pistons? They dont heat expand as fast as the cylinder walls so it give em room to bounce around until they tighten up
xXManwhoreXx is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:33 PM.


Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.