What is on your checklist?

[bizarre179]

In order for my car to make me happy at the moment....

-New hood
-Molded skirts
-Finish projectors (its going down today)
-Custom tails
-Re-wire all leds / cathodes in interior
-Custom gauges
-Get full coverage / plates / new job to fund it


So what does everybody else need / want done to their car (that is actually going to happen)?

[[ion] C2]

All the stuff that's already installed/done can be seen by clicking my signature. Mods cost around $3,000, including those checkmarked below.

√ = have, not installed

Performance
√ - LSJ 378cc fuel injectors
√ - Eagle forged connecting rods
√ - Wiseco forged 9:1 pistons
√ - Wiseco piston rings
√ - Clevite 77 rod bearings
√ - Clevite 77 main bearings
√ - All new gaskets
- Snow Performance methanol injection system
- Pacesetter header
- 2.5" exhaust piping
- long resonator(s)
- Dynomax Super Turbo muffler, dual outlets
- BFGoodrich drag radials
- RC Engineering 440cc injectors
- Port & polish head
- 3 angle valve job, forged stainless steel valves w/bronze valve guides
- Port & polish supercharger
- 50HP NX nitrous system
- Urethane engine/transmission mount(s)
- Carbon fiber coolant reservoir cover

(HPTuned throughout)

Exterior:
- Gunmetal 17" Motegi FF7 wheels
- Paint rear bumper support black
- 35% tint all around

Interior:
- Tenzo R Rally Seats - Gray/Black
- Diamond plate floor mats

Suspension:
√ - Sprint springs
- Rear strut tower bar

Drivetrain:
- Increase transmission line pressure and shift speed w/HPTuners
- Team Green LSD insert

[CBLOHM3400]

lower
msd coils
remove flames
drilled and slotted rotors

[cherrington17]

Step 1) fix my brakes


Step 2) .......


Step 3) Profit

[AJules]

new paint

[jackal2000]

new spark plugs
bigger fuel injectors

[FrankTheTank]

i'll play along, but with my truck.
-new axles from moser
-narrow and install new rear end
-4link rear end
-new front bags
-reupholster seats
-sheetmetal bedfloor
-clean up wiring in engine bay
-fiberglass enclosures for subs
-fix bedside

Heads
Cam
Injectors
Gears
Tune
Front Swaybar
Tires

In basically that order.

[lonnie]

Well lets see... Here's some crap that will be done and some crap that I want to have done, and believe me I will not be paying alot for any of it. HOPEFULLY!!
-stock wheels for alignments
-alignment
-coolant flush
-transmission fluid replacement
-new boots and plugs
-new belt
-paint exhaust tips black
-tie rod ends
-rear rotors
-rear pads
-new cubby
-new seat back handle
-paint job
-weather strips
-new floor mats
-tint on front windows, and a tinted strip on the windsheild
-in dash dvd player
-new black chrome wheels
-new tires for current wheels...176 bucks a piece damn it!!
-seat covers
-new interior carpet

[zoL]

- Money
- New car

[Nate's Alero]

Originally Posted by zoL

- Money
- New car

i dont know why but i find that hilarious

anyway...


Body kit

All Fluid Flush

Full Tune Up

New Rims

New Paint

Dent Remover(stupid Shaws)

New Tires

New Dash Lighting(half are out in random places)

The Least Likely

!!!!!!!!!!!MP45!!!!!!!!!!

[alerored04]

My list is going to be pricey. I am happy with the car right now but my plans include:
Turbo-8-10psi to start
6 speed out of a G6, once installed the turbo will prolly go to 13-15psi
OSV bodykit if I can afford one outside the GB
Air Ride (maybe)

I need to start saving monies lol.

[Valley olds]

Exterior: New Rims or paint current ones, lower car, HID's, muffler tips and painting the pillars between the doors white

Interior: Wood dash, whiteface gauges, if possible wood gauge bezel

Performance: Exhaust with quiet high flow muffler and drilled and slotted rotors

Sound: component speakers all around and what I already got.

Thats it. My plans aren't really that big. The reason for wanting to paint my current rims rather than buy new ones is that this will be my daily driver and I don't want to go to all sorts of places (malls, clubs, Mexico, dances, etc...) with really nice rims.

[Midgear]

though the list is long, I still love my car.. even if it pops while turning, the TCS or ABS doesnt work, or it makes a silly squeaking sound while accelerating. it'll be fixed soon (the rack and pinion being the thing that worries me the most)

- Two new wheel hubs

- recharged A/C

- new blower motor resistor

- rear driver side quarter panel profesionally repaired

- all new mounting hardware for the rear bumper cover

- Entire new dash

- New instrument panel

- White faced gauges

- silly decals and stickers removed

- headers and high flow cat

- entire engine rebuild

- port and polish (everything)

- new rack and pinion

- new CV axels

- KYB struts

- some bad ass tires

- 62mm throttle body

- some kind of supercharger

- 4t65 tranny

- new headlight assembly

- bad ass stereo system

- OSV Bodykit

- OSV Leather seats

- OSV Wheels

- entire new paint job (manta green metallic)

- 4 new window regulators / motors with new main switch for driver door

- 4 new WINDOWS for the doors with new darker tint

- Darker tint on the windshield and rear glass

- a power steering pump that actually works

- new idler pullys so people stop asking me if im supercharged

- the #3 hood in that new thread to be produced and installed

- new belt

- new belt tensioner

- a bad ass car wash and wax

- full tank of gas

- a long straight road that leads to absolutely nowhere

[01oldsgls]

-t3/t4 turbo setup
-new 18" wheels
-35% tint all around
-new double din hu
-install reverse halo gauges sitting in my garage
-smoke friends impala ss

lol

[jackal2000]

Originally Posted by 01oldsgls

-t3/t4 turbo setup
-new 18" wheels
-35% tint all around
-new double din hu
-install reverse halo gauges sitting in my garage
-smoke friends impala ss

lol

i call bullshit.

[01oldsgls]

jigga u dont know me

first i gotta fix the window regulator though. haha

[whiterider00]

maintenance:
new spark plugs
coolant flush and refill

performance:
header and hi flo cat
wider TB and intake manifold
lightened crank and alt pulleys
(maybe some day...) S/C

cosmetic:
figure out what to do with my tails
tint all the way around
fix paint damage
paint brake calipers

[Cliff8928]

hmm..

-OSV kit painted an installed
-Hook up the amp/sub that's already mounted
-Hurst shifter

*after warranty*

-Rear Disc conversion
-Cams
-Some kind of FI (be it turbo or SC or both, haven't decided)
-H&R Springs, AGX Struts
-Recaro Style Topline XL front seats.

That's what i can think of for now, might build a whole new engine..

[AtomicX]

*AAS body kit
*Headers
*New rotors + brakes
*Lower
*Razzi spoiler