01-07-2014, 10:38 AM
|
#1
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Amp mounting
I am getting ready to install my amp, comes UPS today, and my subs. The amp is a JVC KS-AX3101D and the subs are a MTX terminator enclosure (2-12" subs)
I will be running them at 400W RMS total. My question is can I mount the amp on the box with rubber washers? Can i mount it on top or on the backside of the box. I would prefer to mount on the backside as my current ground wire for my 10's isn't long enough to reach the new amp if I mount it on top.
I know that it's good to have the ground wire as short as possible. I have it on a ring terminal using a seat bolt for the ground. I am worried that mounting the amp on the backside of the box, up against the rear seat, will cause it to not get enough ventilation to cool. If I mount it on top it will sit between my 6x9's.
Any suggestions would be great. I would really prefer to mount it to the box as I want some trunk space. My current set up is Bazooka. 2-10" and a amp that powers them 95W a piece. Amp been mounted to top of box for last 11 years but it's a small set up. Not sure I can do that with new set up.
|
|
|
01-07-2014, 10:42 AM
|
#2
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
I also thought about mounting it on the driver side of the box where my wires come into the trunk. It would be sturdier and wouldnt take any direct hits from the subs. Should be enough space in the trunk of my alero to do that.
|
|
|
01-07-2014, 01:04 PM
|
#3
|
GLS member
Join Date: Aug 2010
Location: indy
Posts: 8,411
|
On box itself. Or on back of seat.
__________________
S. . .L. . . E . . .E. . .P. . .Y. . .IS A TRAITOR--HE GOT BORED SO HE SOLD ME AFTER HAVING AN AFFAIR WITH A RICE ROCKET
Oldsnut is my Hero!
Meet Destiny, shes a 2001 Oldsmobile Alero GLS, F40 6MT swap. (#2 of 3)
2/24/14 - 200,000 miles body/motor. 22,300 on F40.
Quote:
Originally Posted by Oldsnut
He would Plasti Dip his pecker if he could.
|
Quote:
Originally Posted by tipnitty
A girl touched my Pee Pee. So you can say things are getting pretty serious for me.
|
|
|
|
01-07-2014, 01:45 PM
|
#4
|
GL Member
Join Date: Apr 2008
Location: Sacramento,Calif
Posts: 730
|
Amp Mounting
I have mine mounted on the rear of my box between the back seat and the amp box.
|
|
|
01-07-2014, 01:59 PM
|
#5
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Thanks for the replies guys. depending how things look in the car I am leaning towards the side of the box but mounting it on the back will look cleaner. I am just worried about cooling with it being between the sub box and back seat
|
|
|
01-07-2014, 02:31 PM
|
#6
|
GL Member
Join Date: Dec 2012
Location: Ottawa Ontario
Posts: 581
|
You could always install some fans near the amp to have some air moving around. It doesn't really matter where it's mounted, whatever works best for wiring, cooling, etc.
For the ground wire, I would find another spot, not the seat bolt. My previous system of around 600-700 rms for bass completely shut off on me because of the ground. Grounding to the strut tower should work best.
__________________
2002 Alero GL 2.2L Eco-tec w/ 87,800km
New System in Progress...Mids/Tweets: 2 Skar SPX component sets powered by a Skar 85.4. Subs: Hybrid 15" DD/AA, Amp: Skar SK3500, 2 runs (power and ground) of Knu OFC 0 gauge, XS d3400 up front, 2 Deka g31s in the trunk...more to come
|
|
|
01-07-2014, 02:34 PM
|
#7
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Quote:
Originally Posted by S8track16
You could always install some fans near the amp to have some air moving around. It doesn't really matter where it's mounted, whatever works best for wiring, cooling, etc.
For the ground wire, I would find another spot, not the seat bolt. My previous system of around 600-700 rms for bass completely shut off on me because of the ground. Grounding to the strut tower should work best.
|
Thanks. I had a pro do this install. I will move the ground when I can get to my tools next week. I am in tech school and my stuff is at the school. Mounting the amp on the back would look cleaner and all the wires would be hidden then.
|
|
|
01-07-2014, 02:49 PM
|
#8
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
I have mine on the backs of the seats... if you're worried about cooling just drop the seat...
I have mine grounded to the seat bolt as well, thought about the strut tower just not sire how it'll work with the strut tower bar installed ...
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
01-07-2014, 03:39 PM
|
#9
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Quote:
Originally Posted by tw0123
I have mine on the backs of the seats... if you're worried about cooling just drop the seat...
I have mine grounded to the seat bolt as well, thought about the strut tower just not sire how it'll work with the strut tower bar installed ...
|
Thanks for the suggestion but I don't wanna put screws into the seats.
|
|
|
01-08-2014, 11:18 AM
|
#10
|
GL Member
Join Date: Apr 2008
Location: Sacramento,Calif
Posts: 730
|
I never have an issue with temps and I' am running a Kenwood 8105D at 500rms/1000 peak thru the Jackhammer dual 12"s box. I wouldn't put screws into my seatbacks but that's just me. It looks super clean on the back of the box. I have pictures here in this section somewhere. I' am at work so can't post pics.
|
|
|
01-08-2014, 12:59 PM
|
#11
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Mounted my amp on the driver side of my box. Looks clean and makes for easy tuning and adjustment of my amp.
|
|
|
01-08-2014, 01:02 PM
|
#12
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
I understand that people don't want to out the screws into the seats... for me i didn't want to put the holes in my box... it was custom made for my car and there wouldn't have been the clearance to have it on the top... that and i have 3 amps running everything ... i used 3/4" drywall screws to mount them and the carpet on the seat back actually bit on the threads so they're good and tight... been there for 7 yrs now and no issues... but yes, it's all personal choice on what and where you like them!!
O.P. yours looks good on the side of the box...
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
01-08-2014, 01:10 PM
|
#13
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Quote:
Originally Posted by tw0123
I understand that people don't want to out the screws into the seats... for me i didn't want to put the holes in my box... it was custom made for my car and there wouldn't have been the clearance to have it on the top... that and i have 3 amps running everything ... i used 3/4" drywall screws to mount them and the carpet on the seat back actually bit on the threads so they're good and tight... been there for 7 yrs now and no issues... but yes, it's all personal choice on what and where you like them!!
O.P. yours looks good on the side of the box...
|
I didn't think there was enough structure in the seats.
Thanks for thinking mine looks good. Gives me more trunk space too.
|
|
|
01-08-2014, 02:16 PM
|
#14
|
GL Member
Join Date: Apr 2008
Location: Sacramento,Calif
Posts: 730
|
LOL yeah I' am going to run into issues like that eventually as I' am looking at adding another 2 amps one replacing the stock amp.
|
|
|
01-08-2014, 02:23 PM
|
#15
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Quote:
Originally Posted by negolien
LOL yeah I' am going to run into issues like that eventually as I' am looking at adding another 2 amps one replacing the stock amp.
|
What if you screw a nice piece of plywood to the seat back to give your amps a platform to sit on
|
|
|
01-08-2014, 03:50 PM
|
#16
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
Ill see if i can get a picture of mine up at some point tonight ... I'm at work now so obviously i cannot right now lol
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
01-08-2014, 09:43 PM
|
#17
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
ok so I got home now... here is how I mounted mine... just fyi, wiring has been cleaned up substantially lol
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
01-08-2014, 10:54 PM
|
#18
|
Powered by LX9
Join Date: Mar 2010
Location: fox vally wi
Posts: 1,429
|
i have mine mounted under the rear deck lid
__________________
2001 ALERO GL SED 4 DR--Build Date: 08-16-2000. There are 17 2001 ALERO GL 4 DR vehicles (0.019%) matching my exact options list.
|
|
|
01-09-2014, 09:25 AM
|
#19
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Quote:
Originally Posted by tw0123
ok so I got home now... here is how I mounted mine... just fyi, wiring has been cleaned up substantially lol
|
Amps look good. If I had that many amps I would probably use the seat too after making a plywood support for it all. You must have one good alternator and battery.
|
|
|
01-09-2014, 09:56 AM
|
#20
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
Lol thanks my battery is just a normal one right now, but my amp has been rebuilt to 200 amps over the stock 105 amps... i am looking into a second battery just to take my.mind off any potential issues though
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 08:52 PM.
|