rain, rain go away

[worknprog.99]

first off happy thanksgiving to everyone!

ok here is the deal my blower motor works on occasion. the problem is is water is getting into the housing and getting the resister connections all wet and the blower connections wet.. what im doing now is just "water proofing" the wires. but what i want to figure out is how to stop the leaks. its soaking the entire passenger floor. and there is no water on the outside of the behind dash area its all inside the blower housing...

what a fun way to start thanksgiving lol..

[AleroB888]

Originally Posted by worknprog.99

first off happy thanksgiving to everyone!

ok here is the deal my blower motor works on occasion. the problem is is water is getting into the housing and getting the resister connections all wet and the blower connections wet.. what im doing now is just "water proofing" the wires. but what i want to figure out is how to stop the leaks. its soaking the entire passenger floor. and there is no water on the outside of the behind dash area its all inside the blower housing...

what a fun way to start thanksgiving lol..

Check this out:

http://www.grandamgt.com/forum/showt...indshield+leak

[worknprog.99]

so update..

im going to try that intake fix.

but earlier when i had everything taken off i dried everything even with a hair dryer to make sure it was dry. re plugged it in and wraped everything in electrical tape. and tried to turn it on and it did nothing. then 20 minutes later after it sat in the rain it started working and then went out. so idk what is wrong