First I want to thank cherrington17 for the original idea.
here is his thread
http://www.aleromod.com/forums/showthread.php?t=8297
1st, remove door panel and tweeter housing
2nd, get the lock/unlock swich out
3rd, fit the new bulb in for the swich
4rd, drill holes where you plan to place the leds
5th, wire them up
6th, i found very quickly that taking power from where the original bulb went was a pain, i couldnt get it to soder right. so after some checking i found power can be drawn from where to plug goes in, you'll need to gray and black.
I drilled holes at the bass of the connection and sodered it there. im sure there are better ways though.
then put it all back together pretty much. (pics below)
sorry, first how to and im still a super noob
Thanks again to cherry for kicking this off.
Threaded Mode