for a radio install? CAKE!
1) remove shifter (small staple on the front holds it in)
2) remove shift bezel (there should be a small lip in the beginning of the cubby hole that you can grab to lift up on)
3) remove radio trim/temp control (just pull straight back from the bottom and work your way around to the top. be sure to remove wiring clips/harnesses from their holsters)
4) remove 4 7mm? bolts that hold the radio in
5) celebrate with a beer.
if you have a digital cam, take pics of the step by step process, and we can make a quick and dirty how to.... just so noobs don't have to keep asking and we dont' have to keep explaining (can just refer them to the page)
|