09-19-2007, 10:57 PM
|
#1
|
GX Member
Join Date: Mar 2007
Location: Cincinnati, OH
Posts: 113
|
Overhaul for boost - Opinions Wanted
I'm getting ready to dig in to my LD9 and prepare it for boost.
I want this engine to be BULLETPROOF, and I am willing to front the cash to make it happen. I am looking for the 350-400hp range, but I want some headroom to approach 450 if I decide to keep going in the coming years.
I'm doing the engine internals all at once, and I don't want to ever take this thing apart again unless I absolutely have to, so I want top-end stuff to go in from the start.
Right now, I'm looking at Wiseco forged pistons, Eagle rods, secret cams, Cometic gaskets, and an 086 head swap. I read somewhere that some folks are using a 2.3 block with a 2.4 crank to produce a 2.6 stroker... Any truth to that? And anyone ever heard of boosting a stroker? (rofl)
Anyone have any experience doing the 75mm LS1 throttle body adaptation? I took some measurements and it doesn't look like the HO intake manifold would work at all, so a custom manifold would be the only way to go. What about the OBX manifolds on ebay they list for the z24's? Supports up to 66mm... I'm sure that could be made to work. Prolly have to cut a damn hole in my hood tho.
I pretty much have my fuel system picked out (all Venom Hi-Flow), and will be using an STR turbo manifold with some BS ebay turbo until I can snag a GT30R. I'm only going to run 8-10 lbs boost until I can get a tune. Anyone here use MegaSquirt?
Lot of questions... Probably opened up a can of worms with this thread.
-Brad
Last edited by RoetherB : 09-19-2007 at 11:24 PM.
|
|
|
09-19-2007, 11:24 PM
|
#2
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,876
|
sounds like you got it all laid out, there is truth to the 2.6 stroker, i'm sure DOHC_tuner will spit loads of information on that.
talk to spyhunter on huge throttle bodies
talk to j-body.org/search on j-body.org about megasquirt, they have lots of information on it
|
|
|
09-19-2007, 11:25 PM
|
#3
|
GLS member
Join Date: Aug 2006
Location: Grand Forks, ND for school; Langdon, ND home
Posts: 2,632
|
http://www.j-body.org/forums/read.ph...57816&t=257816
http://www.j-body.org/forums/read.ph...71397&t=371397
Search that site more, i'm sure you'll find more 2.6 stroker info. I think it siad somewhere that he was aiming for 350hp N\A.
__________________
2001½ F150 XLT Crew Cab- true dual glasspacks with x-pipe, AEM intake, SCT X3 with VMP custom tunes, full stereo system, HID 55w heads and 35w fogs, 35% tint front and 20% rear, Lightning tail lights
04 F6 Sno Pro Team edition- MBRP race can, ODS clutch kit
01 YZ125- bored out to 144, PnP cylinder and head, Pro Circuit WORKS suspension, many other mods
|
|
|
09-20-2007, 08:26 PM
|
#4
|
Boost Guru
Join Date: Mar 2004
Location: Buffalo, NY
Posts: 1,837
|
Forget the stroker idea. Too much work and too much tracking down parts when you can easily make 450hp without it. Look at Spy, he's putting down well into the 400 wheel hp range with 2.4 liters.
Instead of swapping to an 086 head, get the 2.4 head ported, that way you don't have to worry about the high compression problems. And if you're using a Cometic head gasket, make sure you get the head and block surfaces machined perfectly flat so it won't spring a leak on you, and use ARP head studs to seal it down.
Your best bet for an intake manifold would be custom along with your 75mm throttle body.
STR turbo manifold...is that the cast one? If so, good choice, it'll work well and last a long time without cracking.
Instead of using some POS turbo and risking a fully built engine, just get a good one from the start. For you goals of 400hp with the potential for 450, a GT3071R will probably be the perfect turbo for you. It's very efficient and it'll spool very fast.
__________________
Last edited by Spilner521 : 09-20-2007 at 08:29 PM.
|
|
|
09-21-2007, 07:58 PM
|
#5
|
GL Member
Join Date: Jan 2007
Location: las vegas
Posts: 578
|
a side note. Most of my current setup is for sale.
Intercooler pipes, turbo, wastegate, front mount, and even downpipe. BUY IT!
__________________
CARDOMAIN W/ DRAG VID & LIST OF MODS
Trevtec Motorsports built & driven - LV,NV
Revolution Lounge @ the Mirage
Promoter - PM me to be put on the list. Ladies first drink free wed, thur, sat
|
|
|
09-21-2007, 10:39 PM
|
#6
|
Boost Guru
Join Date: Mar 2004
Location: Buffalo, NY
Posts: 1,837
|
Quote:
Originally Posted by spyhunter
a side note. Most of my current setup is for sale.
Intercooler pipes, turbo, wastegate, front mount, and even downpipe. BUY IT!
|
Uh oh...what happened?
__________________
|
|
|
09-21-2007, 10:43 PM
|
#7
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,876
|
He's not satisfied with 12s lol
|
|
|
09-21-2007, 10:56 PM
|
#8
|
GLS member
Join Date: Mar 2007
Location: Tx
Posts: 1,295
|
Im currently in the same process right now. But the only thing holding me back is the Quad 4 Oil Pump Swap. My dam machine shop is a lil sceptical about the swap. I already paid off my forged 9:1 weisco pistons and forged eagle rods, plus my new top mount turbo manifold, ebay turbo for now , and some other parts for the oil pump swap with a total of over 2000 dollars. Still need more stuff but sounds like you got an idea of the process for the build. Take pics!!!
__________________
I love the smell of burned rubber...except when I gotta replace my tires
|
|
|
09-21-2007, 10:56 PM
|
#9
|
Boost Guru
Join Date: Mar 2004
Location: Buffalo, NY
Posts: 1,837
|
Quote:
Originally Posted by [ion] C2
He's not satisfied with 12s lol
|
Yeah, I just read his for sale post. Spy, what's your power goal this time?
__________________
|
|
|
09-22-2007, 02:19 PM
|
#10
|
GL Member
Join Date: Jan 2007
Location: las vegas
Posts: 578
|
After seeing what the cars were running at Battle of the Imports, I want to have 550hp-650hp. Which means this whole setup is getting parted out and update to something more potent. Oh, yeah, and there's this little thing having to do w/ getting a standalone.
__________________
CARDOMAIN W/ DRAG VID & LIST OF MODS
Trevtec Motorsports built & driven - LV,NV
Revolution Lounge @ the Mirage
Promoter - PM me to be put on the list. Ladies first drink free wed, thur, sat
|
|
|
09-22-2007, 02:19 PM
|
#11
|
GL Member
Join Date: Jan 2007
Location: las vegas
Posts: 578
|
Quote:
Originally Posted by [ion] C2
He's not satisfied with 12s lol
|
that and getting whomped on by street hondas didn't make me feel too good about myself either.
__________________
CARDOMAIN W/ DRAG VID & LIST OF MODS
Trevtec Motorsports built & driven - LV,NV
Revolution Lounge @ the Mirage
Promoter - PM me to be put on the list. Ladies first drink free wed, thur, sat
|
|
|
09-22-2007, 07:04 PM
|
#12
|
GLS member
Join Date: Mar 2007
Location: Tx
Posts: 1,295
|
Quote:
Originally Posted by spyhunter
that and getting whomped on by street hondas didn't make me feel too good about myself either.
|
what? please elaborate
__________________
I love the smell of burned rubber...except when I gotta replace my tires
|
|
|
09-23-2007, 01:48 AM
|
#13
|
Boost Guru
Join Date: Mar 2004
Location: Buffalo, NY
Posts: 1,837
|
Quote:
Originally Posted by DOHC_tuner
what? please elaborate
|
When Hondas are built right and not riced out like the usual Civics you see driving around, they can be fast little cars.
There's a few street driven Hondas around here that have the piss built out of them and run 10's.
__________________
|
|
|
09-23-2007, 08:20 AM
|
#14
|
GX Member
Join Date: Mar 2007
Location: Cincinnati, OH
Posts: 113
|
Sweet, thanks for all the great info so far.
Does anyone recommend JBP? Their prices are pretty insane, from what it looks like. Are their stage 2 cams worth the additional $700 over secret cams on ebay?
http://www.jbodyperformance.com/new/...tName=JP029 5
How about their crank services? They do lightening, polishing, knife-edging, etc. It looks like I could spend $1281.50 on my crank alone getting it all tweaked out. Surely some of that stuff isn't worth the price. It's all stuff I would like to have done, but I'm not going to spend $500 on 2 whp unless there is some other added benefit in strength or sound.
So far, it looks like step 1 is going to be getting the head P&P, 3-angle, possibly 5, valve job. The problem is, I have no clue where to go in the Cincinnati/Northern KY area to get something like that done. Bleh. Anyone know of any decent services online that have reasonable prices? JBP wants like 3 grand or something insane for a head P&P with 5-angle valve job.
-Brad
|
|
|
09-23-2007, 10:12 AM
|
#15
|
I Have ONE NUT
Join Date: Dec 2003
Location: North Mankato, MN
Posts: 1,017
|
If you look at everyone with a 2.4 running big #'s they have the secret cams not the JBP cams.
I tried to do business w/ JBP and they didnt seem to want my money enough to call me back after they quoted me $2400+ bill. IMO if they were reliable they would return they call and make some money. I was on this trip for a while too but, I ask again and again, and JBP didnt even return my e-mail to let me know if their stage 2 cams work well with boost. One of the dealers return my e-mail with this response: "The stage 2 cams will permet you to run boost". That is the answer I wanted but, without the substance. I then asked if anyone was using these cams and he said their was one car with the hahn turbo running 9 psi with no problems. That made me feel a little better so, at that point (to get to one of your questions) I asked him what the difference between the stage 1 (which are the secret cams, just their grind) and the stage 2. His response was vage. He only said that the stage 2 cams were better and he recommended getting new lifters (duh), springs (because people who dont use their springs get oil in the combustion chamber), and retainers (which have to used with their springs). If you want head work go to induction dynamics (which carries a crower valve train upgrade w/ flow benching and more) or mabey even talk to spy and see if you can get some work done through him. I just wouldnt do business w/ JBP unless I have to at this point.
__________________
|
|
|
09-23-2007, 12:11 PM
|
#16
|
GLS member
Join Date: Aug 2007
Location: Hartford, CT
Posts: 917
|
Quote:
Originally Posted by RoetherB
I have no clue where to go in the Cincinnati/Northern KY area to get something like that done.
-Brad
|
wow, somebody else from the Cincinnati area
and hey, if you ever find somebody in the area who does a lot of work with our cars, let me know
|
|
|
09-23-2007, 01:06 PM
|
#17
|
[boosted 2.4L]
Join Date: Dec 2004
Location: Central PA
Posts: 1,537
|
stay away from that OBX crap. it's cheap copies of good parts. the bolt holes won't line up for the intake manifold. check j-body.org for A LOT more info.
|
|
|
09-23-2007, 01:26 PM
|
#18
|
GX Member
Join Date: Mar 2007
Location: Cincinnati, OH
Posts: 113
|
Quote:
Originally Posted by AJules
wow, somebody else from the Cincinnati area
and hey, if you ever find somebody in the area who does a lot of work with our cars, let me know
|
Ha! And my cat's name is Jules! We're practically family!
Thanks for the info on JBP and OBX. I think I'll just go with secret cams for now and see if I can locate a welder to fab me up an intake. (Venom one is pretty, but $900... Holy Shnykies...)
-Brad
|
|
|
09-23-2007, 07:58 PM
|
#19
|
GL Member
Join Date: Jan 2007
Location: las vegas
Posts: 578
|
if you want something like my intake manifold, you're expecting something like $800-900.
It takes a lot of money to go big dog status. If you're just looking for 300hp, just have your head cleaned up and slap in some ss valves and secret cams. Add some rods and pistons, get all new gaskets and stuff. Then call it a day.
__________________
CARDOMAIN W/ DRAG VID & LIST OF MODS
Trevtec Motorsports built & driven - LV,NV
Revolution Lounge @ the Mirage
Promoter - PM me to be put on the list. Ladies first drink free wed, thur, sat
|
|
|
09-23-2007, 08:01 PM
|
#20
|
GL Member
Join Date: Jan 2007
Location: las vegas
Posts: 578
|
wait you said 350-400 range... just get a 2.3HO intake manifold and slap on a bigger throttle body... easy. and keep the headwork simple. the power you make is going to depend more on the fuel, the boost you throw at it, and the tuning.
__________________
CARDOMAIN W/ DRAG VID & LIST OF MODS
Trevtec Motorsports built & driven - LV,NV
Revolution Lounge @ the Mirage
Promoter - PM me to be put on the list. Ladies first drink free wed, thur, sat
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 11:22 AM.
|