09-21-2014, 12:40 PM
|
#1
|
GL Member
Join Date: Dec 2012
Location: Ottawa Ontario
Posts: 581
|
Power Door Issue
I was searching through the forums for a while and couldn't find an answer. My power locks are able to unlock the doors, but I can't lock them.
When I start driving the car, I hear the noise that it makes when you lock the car with a remote (horn noise).
Does anyone know what this could be?
__________________
2002 Alero GL 2.2L Eco-tec w/ 87,800km
New System in Progress...Mids/Tweets: 2 Skar SPX component sets powered by a Skar 85.4. Subs: Hybrid 15" DD/AA, Amp: Skar SK3500, 2 runs (power and ground) of Knu OFC 0 gauge, XS d3400 up front, 2 Deka g31s in the trunk...more to come
|
|
|
09-21-2014, 05:59 PM
|
#2
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Sounds like a short. Possibly to ground because of the horn wanting to work. All the window switch is is a sensor to the bcm to tell it to work the window.
|
|
|
09-22-2014, 12:22 AM
|
#3
|
GLS member
Join Date: Jun 2007
Location: Utica, Michigan
Posts: 2,227
|
Is it all doors or just one door? I had one door quit and it was the solenoid.
__________________
2000 Chevrolet Malibu LS
2000 Oldsmobile Alero GL (sold)
|
|
|
09-22-2014, 07:26 AM
|
#4
|
GL Member
Join Date: Dec 2012
Location: Ottawa Ontario
Posts: 581
|
All the doors.
__________________
2002 Alero GL 2.2L Eco-tec w/ 87,800km
New System in Progress...Mids/Tweets: 2 Skar SPX component sets powered by a Skar 85.4. Subs: Hybrid 15" DD/AA, Amp: Skar SK3500, 2 runs (power and ground) of Knu OFC 0 gauge, XS d3400 up front, 2 Deka g31s in the trunk...more to come
|
|
|
09-22-2014, 07:41 AM
|
#5
|
GL Member
Join Date: Dec 2013
Location: Minnesota
Posts: 593
|
Since it's all the doors it's probably the master switch in the drivers door panel. All the windows run through that switch. I would hate to think your bcm is going bad.
|
|
|
09-22-2014, 08:31 AM
|
#6
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,369
|
Probably a wiring issue.... when i swapped the doors in my van i had to tap am alternate power source as the fuse was not wired up in my fuse panel as it wasn't an option ordered originally on that model....
__________________
Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
09-22-2014, 11:39 AM
|
#7
|
GL Member
Join Date: Dec 2012
Location: Ottawa Ontario
Posts: 581
|
It's my doors that came with the car lol. I'll check the voltage at the fuse
__________________
2002 Alero GL 2.2L Eco-tec w/ 87,800km
New System in Progress...Mids/Tweets: 2 Skar SPX component sets powered by a Skar 85.4. Subs: Hybrid 15" DD/AA, Amp: Skar SK3500, 2 runs (power and ground) of Knu OFC 0 gauge, XS d3400 up front, 2 Deka g31s in the trunk...more to come
|
|
|
11-24-2014, 07:43 AM
|
#8
|
GX Member
Join Date: Oct 2014
Location: Germany
Posts: 50
|
Had a similar issue as I bought the car. I replaced the relays of the power door locks and then it worked absolutely fine. Its worth a try before you start to change more expensive parts like bcm.
__________________
99 Alero GLS
92 Chevrolet Caprice Classic
|
|
|
11-24-2014, 08:02 AM
|
#9
|
Premier V.I.P. Member
Join Date: May 2011
Location: Ferdinand Indiana
Posts: 2,742
|
I would start with your master switch... thats weird though.
__________________
3rd alero- 02 GX 2.2 5sp coupe. drove for 3 years 55,000 miles. Sold for a kids first car, and missed
01 Intrigue GX
2016 Chevy SS, Jet Black
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:47 PM.
|