I have begun replacing the starter when i came across the 2 stubborn as hell bolts to remove. i was able to remove one with a cheater bar (No air tools ) and the second i can not seem to budge. Is there an easier way to get this bolt out?
__________________
just call me "Doc"
HID 55W 8000K lowbeam headlights~~Sony Deck~~2 12 in alpine type r subs/ alpine amp
Tinted tail lights~~CAI~~Pacesetter Headers~~ Magnaflow High Flow Cat~~Catback Exhaust System Check out my alero! Aleromod Showcase Video
Put a piece of fine metal mesh over a 6 point quality socket with as big a bar as you can use, or get a length of pipe to go over your handle. Heat around the bolt (not the bolt) with a propane torch, whack the socket on with a hammer and crank it off. Poor mans fix but it works. Works great for rounded off lug nuts too.
Do you have room to get at it with an impact gun? If so, go to harbor freight and get a cheap electric impact and get it out. Mine has saved my ass MANY times!
__________________
Ahhhhh!!!!!! Don't Scratch My Paint!!!!