eco intake by APOC

[springs fastest alero]

Well last friday I finally got to play with an eco.
didn't get it setup exactly like I would of liked because of hood clearence but after pulling a resonator/ tuner tube out of the only stock piece left, it's very free flowing. I should have pix of the inside ot the box on the tb soon.
I'll have one ready to ship by next week if anyone is interested.

anyway here are the pix.

Looks sweet, long overdue, but worth the wait! How much we looking at, and just curious, does leaving the stock box above the TB have any affect on the performance?

[springs fastest alero]

Originally posted by wy3134@Feb 24 2004, 02:44 PM
Looks sweet, long overdue, but worth the wait! How much we looking at, and just curious, does leaving the stock box above the TB have any affect on the performance?

I dont think it will
the only real restrictive part of that piece is the tube inside
and we pulled that out
leaving it with a fairly large opening and a straight shot at the tb.
its now like a small plenum. and the guy that has the intake is happy
he said he noticed a gain more up top than anything
I would of liked to dyno before and after but that between 100-150 just to see how it does

retail on the exact kit in the pic will prolly be close to 240 (inverted top K&N)
standard kit will be about 220 (regular K&N)

Wow, nicely done dude, looks good - How much without a filter at all? how big is the piping, and I am definitely looking forward to some dyno results - also, can you show a pic of it behind the front drivers side air dam on the bumper? Thanks.

[springs fastest alero]

dunno without the filter
but they will be on special for march madnees on my site
tubing is 3".
I'll see if I can get a fenderwell shot from the customer
in the fenderwell its virtually identical to my V6 intake

looks good john

[springs fastest alero]

Originally posted by SweetAlero99@Feb 24 2004, 11:10 PM
looks good john

thanks

Looks clean, well done :thumbsup:

can I also see a shot of all the peices that make it up as well - just curious how many, and what sorta bends you had to do to get it to fit in there. Good work man, and Im glad to see more attention being put on us lowly Ecotec guys, :P Keep it up!


P.s. any more plans for ecotec parts whether it be long term or short term...?

[springs fastest alero]

I'll be carrieing an ud pulley soon
I can also get all the gm parts as well as ones from rksport.

the intake is made up of 4 bends
3 90's you see and a 45 in the fenderwell that mounts the filter.
I can only get the pix they send me since the customer lives a little over 60 miles away

[BLK03GXS]

how much shiped to canaduh?
In canuck moneys

lol :thumbsup:

[springs fastest alero]

its about $13 us shipping just takes a little longer
dunno my conversions sorry

[BLK03GXS]

Thats cool, do you have a piece made up to get rid of the stock TB adapter?
cus if not you should

thats fresh dogg :thumbsup:

Keep in mind that there may be duty fees when crossing the border.

[springs fastest alero]

Originally posted by BLK03GXS@Feb 26 2004, 06:40 PM
Thats cool, do you have a piece made up to get rid of the stock TB adapter?
cus if not you should

not much room to work with as explained above
but we modded the stock piece to flow extremely well
tried getting pix last night of that piece but my email wasn't liking the customers so gotta try somthing different

if u were to relocate your battery like me there would be less bends and u prolly could of used that extra 90 to replace the factory piece i notice a difference with that factory piece replaced

[springs fastest alero]

Originally posted by geedog66@Feb 27 2004, 10:47 AM
if u were to relocate your battery like me there would be less bends and u prolly could of used that extra 90 to replace the factory piece i notice a difference with that factory piece replaced

did you remove the tuner tube from the factory piece before replacing it?
a battery relow kit with the intake would pus cost way up

also what header are you using?

yeah i replaced the tuner pipe from the factory intake.... the battery relocate cost almost nothing im still using the factory battery tray all i used to mount it was some screws and a painted piece of wood most of the stuff i already had so it didnt cost me anything im using the rksport header which is a nice looking header but my flex pipe on the lower part of the header broke off once and i replace it with another heavy duty flex pipe and that on is already leakin exhaust other than that that header will make a big difference to that engine

[springs fastest alero]

if anyone is interested I got one of these made up and instock.
just ordered parts for another one.
pm me if your interested in buying