New Interior

[sorrowfulkiller]

the 2nd... more lbs behind it and two remotes.. can't go wrong either way though >_>

[Eh_nigma]

Quick update, I've got the key cylinder mounted in the back, the ignition switches mounted, aaaand... the front of the console is all dolled up now with cleaner wiring.

As well, the e-brake servo is being installed right after I eat something, have a poopty, and get back at it. I might even throw a video on the update tonight...

[Satsuriku]

shit dude!!! slow down a bit hahahaha!

sweet idea for the video should be good

[pawzbear]

have a poopty? really, mark?

[Eh_nigma]

Okay, so... I'm done for the night...

Managed to get the inginition switches working, e-brake to work, and all the wiring taken care of. Doesn't seem like much, but then there's three bundles to fish through the car and connect appropriately, with a total of 240 ft of wire... including wrapping, it turns out to being quite a bit...

1. Key Cylinder mounted in the back as a "master" with complete wiring: http://i171.photobucket.com/albums/u...cha/master.jpg
2. The switches - this will be covered by the fiberglass "spine" going in (E-brake/Acc/On/Ingintion: http://i171.photobucket.com/albums/u...a/switches.jpg
3. Dash section of wiring: http://i171.photobucket.com/albums/u.../wiringtop.jpg
4. Floor Section of wiring: http://i171.photobucket.com/albums/u...loorwiring.jpg
5. Video Clip - Ignition Firing Up: http://s171.photobucket.com/albums/u...t=MOV00294.flv

Tomorrow - the LED lighting for the e-brake will be done... after that... ummm... I'm not quite sure, I've run out of things to do for this weekend.

The sender unit for my instruments is on order, and my door-poppers were bought, so they should be in soon... instruments as well, not to mention seats/harnesses will be coming in. Until those get here... I really don't have much to do except for the rear interior of the car... but, that, as it turns out, wont be touched until next week...

Maybe I'll finish up the interior lighting...

[Satsuriku]

dude that is one sick set up for the ignition man!!!!!!

[antichrysler]

That's sweet!!! Good work on the ignition.

[Eh_nigma]

...junk... woke up sick this morning - perhaps too much of the drinky-drinky last night... ...wait, there was no drinky-drinky, I'm actually sick... junk.

Went into town, picked up more supplies, in a few hours I'll hopefully be feeling a bit better to get back to the garage...

[Eh_nigma]

forgot to also mention, ordered up the two seats, and 4pt cam harness's. Monday the instruments will be ordered as well. And I can't forget, but thanks go to Pat for help with some extra parts. Door Poppers should be in within a week or two, and well... yeah, guess this means I'll be doing minor things to the body before I know it as well...

[Eh_nigma]

I got my seats... I got my seats... they're already in... I'm really happy... ...now I just need to find a ride into Brandon and pick them up... can't exactly drive in without a dash, seat, or steering wheel right now... but, I got my seats...

[Satsuriku]

you got new seats..........but no pics? lol common mark, havent ya learned this game yet? hahaha jk

[ptrudel]

no prob...anything else you need just lemme know, i'd much rather ship in canada...good luck!

[pawzbear]

ohh Patty cakes im still sad your alero's done for good... =(

[ptrudel]

you and me both candace...i aint goin nowhere, and i'm sure i'll end up drivin another if i can get rid of the neon...5spd ecotec is what i want

[Eh_nigma]

Rob, the seats are still in Brandon, however as soon as I get them they're going in to have new material and padding put on them... shmeee... and I don't take pics until things are complete... HA! Right... I don't think anythings complete yet...

[billytheman1188]

yo man, idk how the hell to put this, but THAT IGNITION KICKS ASSSSS

[strtrydr]

Man ... that is badass so keep at it and like everyone else said post some damn pictures.

J/K LOL ... Keep up the good work!

[Eh_nigma]

How Pissed Am I?

Went in to take a boo at those seats. Yeah, two things caused me to explode... first, it was the wrong set of seats. As well, they wanted me to pay up $200 a seat for the cost of ordering them in... tick-tick-tick-BOOM. Needless to say, still no seats.

I do apologize for the lack of updates this last little bit. Ask Candace why that's happening. No, seriously, things have been a bit busy.

Tonight I layed down the filler over the fiberglassed part on the door panel. Tomorrow I'll sand it down, prime, paint, and clear coat it. Meaning, that the panel will be almost completely complete by hopefully Thursday night.

As well, the vinyl was stripped off of the dash. Holy hell. Let's just say that ate up some time. The piece is now fully ready for fiberglassing tomorrow as well. Not to mention, the emergency light, old key port, and center vent have been filled in and covered. A bit of extreme filling - you'll see in the pics coming tomorrow how much filling was done... but, yes... there's also plans to cut into the top of the dash, but I'll think about that overnight...

Still waiting for door poppers, and just due to time constraints - need to have the car at least drivable for the 5th of May... I'll be holding off on doing the instruments and sound system up. If I can get the dash completed with the door panels... that's enough for me... then back at it on the 9th

[pawzbear]

ask Candace? pffft its not my fault mark get yo head in the game.... =-P

u can come strip my dash while ur at it.. it seems to already have itself halfway undid... =/

[Satsuriku]

Originally Posted by pawzbear

it seems to already have itself halfway undid... =/