I guess i'll do a step-by-step. (I dunno if we have one already or not)
1.) Choose location of where you want the cooler mounted. ( Most people do it in front of the condenser/radiator)
2.) Mount cooler
3.) Adapt fittings onto cooler
4.) Attach hose onto fittings
5.) Cut the bottom return line from the stock tranny cooler lines.
6.) Use 3/8 barbs to attach the hose ends and clamp down.
7.) Refill tranny fluid as you now need to make up room for the cooler add-on.
8.) Start up car and check for leaks at all the fitting ends.
9.) Enjoy a cooler tranny temperature and making it longer lasting.
----------------------------
Stock mount
Milzy Motorsports solid billet tranny/motor mount!
Installed!
Note: This motor mount is not for the average person. The mount is so stiff, the inside of the car and/or whole car vibrates harshly at idle!
Here are just the newest additions to the turbo project. Which will be done in 2 1/2 weeks.