Temp=ok, but no pressure in hoses

[2fastshifter]

Hi!
i have changed my headgasket, (and some more)
put everything together, car started like normal . . .woohoo!
no leaks, idle warmup, drove home 10miles, but still the fat radiator hoses are soft.
no pressure inside, heater system works great,
cooling fans starting seems to start a bit early )1/2 of the normal operating temperature,so thats a bit early i think . . . . .
temp gauge was normal on the way home(1/2)
i did nothing to the thermostat, it stayed where it was before, working fine then, so i did not tough it.
i did not disassemble the waterpump. just the three bolds holding the timingchain housing to the waterpump, its sproket stayed in place.just pulled the TCH over it . . . .
the plastic water outlet on the drivers side was a little warm, the hose from it to the radiator remains cold and pressureless . . . .
so i wanna know:
is there some air bubbles in the cooling system?
why is there no pressure in the coolant hoses?
How do i solve this?
thanx, mark.

btw, my A/C was already long time not working, so i can't switch that on to help solve it?. . . . . .