Help

Redog · 02-11-2005, 09:14 PM

I have a set of 4 led lights I bought off eBay and they came with a switch with 3 prongs.

I know there is a +, - and ground on the switch but I can't remember which is which.

For power, can I go into the igntion wire? I'd use the same that my VOLTS gauge is hooked up to. Just tap into that somwhere

Any ideas

I searched but couldnt find it. too may pages to look over

FormulaNERD · 02-11-2005, 09:29 PM

how many prongs are on the switch?

Screamin eagle · 02-11-2005, 09:33 PM

3 GOSH!!!!

FormulaNERD · 02-11-2005, 09:48 PM

haha, i'm so stupid!

anyways...., wow.

but yea, 12v to the ignition, you know where ground is, and the other is gonna be the power wire for the leds.

in order to tell which is which, look at the switch, the power prong is gonna be the one that's on the same side when the switch is on, if that makes sense...

worst case scenario is that the leds are on when the switch is off, and vice versa... then swap them.

ImSoBored · 02-11-2005, 11:13 PM

All my lights are hooked up through the cig lighter.