01-04-2010, 04:15 PM
|
#1
|
GX Member
Join Date: Apr 2007
Location: London, Ontario, Canada
Posts: 139
|
Whats wrong now ??????????? :(
So im driving along today and the parking bake light comes on. Im like wtf. So i check the P Brake and it is not engaged. I turn off the car, turn it back on and all is good. 10mins later back on. I checked my brake fluid and its good. What can this problem be????
__________________
2003 Alero GLS 3.4L
|
|
|
01-04-2010, 04:24 PM
|
#2
|
GL Member
Join Date: Sep 2009
Location: Vancouver, BC
Posts: 268
|
Does the ABS light come on as well? I think your pads are gone!
__________________
GS - 01 Alero Coupe - MT, CG-lock,Front/rear strut tower brace,WAI,Fidanza Short throw Shifter and custom short throw clutch, AGX adjustable struts and mounts, Dropzone Springs, speedbuilt front sway bar, Toyo R888.
CS - 06 RX8 - Special Edition Shinka, 285 Hoosier A6.
|
|
|
01-04-2010, 04:58 PM
|
#3
|
Premier V.I.P. Member
Join Date: Feb 2009
Location: Oxbow SK
Posts: 1,385
|
my brake light used to come on. but so were my abs, trac off, and svs light for a wheel bearing. replaced said wheel bearing, light hasn't come on since
__________________
2002 Alero w/ 2.2 ecotec 5 speed
power window conversion, heated leather seats, 16" rims, high & low hids, auto dimming rear mirror, speedbuilt front and rear sway bars, poly bushings all around.
2005 Silverado 2500HD w/ 6.0l Vortec 4L80E
Tuned 6.0l, exhaust, intake, with 450000km on the odometer. Tow Rig
1985 Pontiac Trans Am GTA w/ 5.7 Vortec 700r4
mild vortec 350 with 4 speed auto. performance suspension. factory gold color. project car
|
|
|
01-04-2010, 05:28 PM
|
#4
|
Now a Ford Traitor.
Join Date: Mar 2008
Location: Greenland
Posts: 6,996
|
hmmm. maybe metering valve or pressure differential valve...
does the car stop the same?
__________________
|
|
|
01-05-2010, 06:40 AM
|
#5
|
GX Member
Join Date: Apr 2007
Location: London, Ontario, Canada
Posts: 139
|
ya the car stops the same. i know i need to replace the bearings, i just have not gotten around to it becasue of the holidays. but today i have to drive back home 6 hrs i just hope its safe to do so.
__________________
2003 Alero GLS 3.4L
|
|
|
01-05-2010, 06:50 AM
|
#6
|
Now a Ford Traitor.
Join Date: Mar 2008
Location: Greenland
Posts: 6,996
|
Quote:
Originally Posted by Xtrm
ya the car stops the same. i know i need to replace the bearings, i just have not gotten around to it becasue of the holidays. but today i have to drive back home 6 hrs i just hope its safe to do so.
|
well, if it stops the same....take it SLOW... and keep checking your brakes...
__________________
|
|
|
01-05-2010, 12:02 PM
|
#7
|
GLS member
Join Date: Mar 2008
Location: MA
Posts: 1,304
|
double check the fluid. mine did that for about a week, and it was the brake fluid. it was just barely below the full line so when i took sharp turns, or when it was really cold it was enough to set off the sensor.
|
|
|
01-05-2010, 02:20 PM
|
#8
|
GLS member
Join Date: Dec 2006
Location: Montreal, Qc, Canada
Posts: 1,876
|
Some ppl had to change the actual sensor in the brake fluid tank. Maybe it is shot.
__________________
2 door 2000 Black GX With a stick: M45 eaton supercharger - Quad4's 57mm Throttle body - Custom WAI - KYB GR-2 struts - CM Lowering springs - Front and rear strut tower brace - R1 concept zinc plated drilled/slotted rotors with semi-metallic pads - short shifter.
Quote:
Originally Posted by Alerosaint
the #6 bolt torque..its impossible to get...unless I use telekenesis
|
|
|
|
01-05-2010, 03:59 PM
|
#9
|
GX Member
Join Date: Apr 2007
Location: London, Ontario, Canada
Posts: 139
|
Alright. Thanks for all the input.
__________________
2003 Alero GLS 3.4L
|
|
|
01-08-2010, 02:28 PM
|
#10
|
Premier V.I.P. Member
Join Date: Feb 2009
Location: Oxbow SK
Posts: 1,385
|
like i said, mine was just coming on while driving around, new brake shoes, full of fluid. i let my wheel bearing go for about 3 months,and it just started coming on in the last week or two. When i changed the bearing, it hasn't come on since.
__________________
2002 Alero w/ 2.2 ecotec 5 speed
power window conversion, heated leather seats, 16" rims, high & low hids, auto dimming rear mirror, speedbuilt front and rear sway bars, poly bushings all around.
2005 Silverado 2500HD w/ 6.0l Vortec 4L80E
Tuned 6.0l, exhaust, intake, with 450000km on the odometer. Tow Rig
1985 Pontiac Trans Am GTA w/ 5.7 Vortec 700r4
mild vortec 350 with 4 speed auto. performance suspension. factory gold color. project car
|
|
|
01-09-2010, 01:36 AM
|
#11
|
Soon to be banned again
Join Date: Nov 2005
Location: Bellmore, NY
Posts: 3,372
|
sounds like you need to bleed the brakes
__________________
I shaved my balls for this?
|
|
|
03-23-2010, 06:55 PM
|
#12
|
GX Member
Join Date: Apr 2007
Location: London, Ontario, Canada
Posts: 139
|
Sorry for bringing this thread back to life but my issue had gone away, but has now returned. New pads and rotors front and back, new bearings. light comes on almost instantly when i start the car.
__________________
2003 Alero GLS 3.4L
|
|
|
03-23-2010, 06:56 PM
|
#13
|
GX Member
Join Date: Apr 2007
Location: London, Ontario, Canada
Posts: 139
|
Quote:
Originally Posted by Gr1m
sounds like you need to bleed the brakes
|
How do I bleed the brakes? I have never done this before.
__________________
2003 Alero GLS 3.4L
|
|
|
03-23-2010, 10:56 PM
|
#14
|
03 Subaru WRX
Join Date: Feb 2005
Location: Bath, Maine
Posts: 327
|
One time my brake light came on. I needed a little bit of brake fluid in my master cylinder. I topped it off and I was good to go. Bleeding the brakes isn't a bad idea however, I chose not to do that lol.
__________________
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 05:52 AM.
|