04-19-2020, 12:35 AM
|
#11
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,876
|
Throttle body's back, now in 62mm. Unfortunately the adapter plate I made is only 58mm because I had originally planned to use the LS1 throttle body, so the bore was plenty for the stock throttle body.
I'm going to work on separating the adapter from the manifold (I used The Right Stuff, which is exceptionally good at sealing, and... holding parts together.) and cleaning up all the gasket maker residue tomorrow, and hopefully get it bored to 63mm or so this week and reinstalled and the tune slightly adjusted.
|
|
|