07-09-2007, 04:41 PM
|
#1
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
CAI Problems?
ok i'm new here and ill first off admit that im not the best with cars, now about a week ago i installed a 3pc cold air intake on my car that i bought offline and the installation was simple, i did it myself. the car ran fine for about 4 hours then stuff started going wrong. first the car wouldnt shift if i had my foot too far down and now the car's power seems to be cut in half. if i floored it before i put the cai in it would shift at 40 mph at almost red line, now if i floor it it will rev up to about 4 grand at 25 mph and just sit there, it will only shift if i let of the gas. can anyone give me any suggestions as to what the hell is wrong with my car. the engine is the 3400 thats why i posted in here. any advice would be most appreciated.
|
|
|
07-09-2007, 06:19 PM
|
#2
|
Soon to be banned again
Join Date: Nov 2005
Location: Bellmore, NY
Posts: 3,372
|
service engine light on? could be a sensor, like your MAF
__________________
I shaved my balls for this?
|
|
|
07-09-2007, 06:24 PM
|
#3
|
Southern Fly Boy returns
Join Date: Jan 2005
Location: OKC/Austin/El Paso
Posts: 1,521
|
wait first off what engine do u got and then we can go from there
__________________
|
|
|
07-09-2007, 06:25 PM
|
#4
|
Southern Fly Boy returns
Join Date: Jan 2005
Location: OKC/Austin/El Paso
Posts: 1,521
|
3400 engines have a maf and 2.4's have a map so either way ur problem would lie there.
__________________
|
|
|
07-09-2007, 06:27 PM
|
#5
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,876
|
Quote:
Originally Posted by MixtapeMessiah
wait first off what engine do u got and then we can go from there
|
Quote:
Originally Posted by quazthespaz
the engine is the 3400 thats why i posted in here.
|
just wanted to point that out
|
|
|
07-09-2007, 06:29 PM
|
#6
|
Southern Fly Boy returns
Join Date: Jan 2005
Location: OKC/Austin/El Paso
Posts: 1,521
|
lol my mistake, I should read what topic its in next time, but yea since its the 3400 check ur maf
__________________
|
|
|
07-09-2007, 06:44 PM
|
#7
|
Soon to be banned again
Join Date: Nov 2005
Location: Bellmore, NY
Posts: 3,372
|
hehe a new MAF is like 140$ have fun
__________________
I shaved my balls for this?
|
|
|
07-09-2007, 07:00 PM
|
#8
|
Southern Fly Boy returns
Join Date: Jan 2005
Location: OKC/Austin/El Paso
Posts: 1,521
|
well a connection could be messed up or something, he coulda pinched a wire when puttin that cai in, so just look around dude and if the maf is effed then yes it is a good 140 bills
__________________
|
|
|
07-09-2007, 07:25 PM
|
#9
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
all right i'll check that out and let you guys know, thanks alot.
|
|
|
07-09-2007, 07:36 PM
|
#10
|
GL Member
Join Date: Apr 2007
Location: Olney, IL
Posts: 306
|
if you haven't done it already, try this...disconnect the battery for a minute or so, then hook it back up...it'll reset the computer so it can recalibrate for the extra airflow
|
|
|
07-09-2007, 07:50 PM
|
#11
|
Keepin it Real
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 12,522
|
Quote:
Originally Posted by SIUlero
if you haven't done it already, try this...disconnect the battery for a minute or so, then hook it back up...it'll reset the computer so it can recalibrate for the extra airflow
|
it takes longer than a minute for the PCM to clear, more like 15-20. the PCM doesnt "recalibrate" either. it relearns its parameters to what it thinks is normal. if the PCM could recalibrate itself then we wouldnt need tuners. if that makes sense.
the problem with your car sounds like its MAF related (as others have said). check all the sensor connections and have it scanned to see if there are any trouble codes.
__________________
2015 Audi SQ5
2000 Alero GLS Coupe - still in the family, but I don't drive it anymore
|
|
|
07-09-2007, 08:07 PM
|
#12
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
alright i have my battery unpluged as we speak ill wait a little and hopefully it should be good, just incase though, does anyone know about how much it should cost to have the pcm recalibrated?
|
|
|
07-09-2007, 08:48 PM
|
#13
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
alright well the battery thing didnt work. any other ideas?
|
|
|
07-10-2007, 12:43 AM
|
#14
|
Moderator
Join Date: Nov 2004
Location: Long Grove, IL
Posts: 5,002
|
make sure the MAF is installed right. It does have a flow direction.
__________________
Cliff Scott
2004 Alero GX w/sport pkg - Sold, living somewhere in WI now.
2011 Saab 9-5 Turbo4 M6
2004 Corvette Convertible M6
1994 Chevy Beretta - Quad4/M5
|
|
|
07-10-2007, 12:49 AM
|
#15
|
3500 DONE!
Join Date: Apr 2006
Location: Albany, NY
Posts: 5,915
|
Quote:
Originally Posted by Cliff8928
make sure the MAF is installed right. It does have a flow direction.
|
i was just about to post that, i know that happened to another guy on this site.....
__________________
2002 3400 & 3500 GL "Ruby"-->R.I.P. 163k. My first car. Put 130k on her.
2000 3500 GLS "Robin"-->Intake,Headers,Exhaust,H&R springs,KYB AGX,Sway bars,Strut bars and more
|
|
|
07-10-2007, 01:01 AM
|
#16
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
yeah i have the arrow in the correct direction. i dont understand why the car is acting like this.
|
|
|
07-10-2007, 02:17 AM
|
#17
|
Southern Fly Boy returns
Join Date: Jan 2005
Location: OKC/Austin/El Paso
Posts: 1,521
|
make sure u didnt pinch any wires while u were hookin up ur cai, while i was hookin up my wai I forgot bout some wires and I had the same problem so just look around the engine bay to make sure shit is connected right
__________________
|
|
|
07-10-2007, 10:28 AM
|
#18
|
GLS member
Join Date: Jul 2004
Location: Where you should be
Posts: 5,577
|
Also you probably disconnected your MAF clip when installing right>?
Check to see if the prongs are bent on the MAF itself. I did bend one of mie when I installed my CAI and it made my car act crazy
|
|
|
07-10-2007, 11:00 PM
|
#19
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
nothing worked to fix my problem so i'm just gonna bite the bullet and take her to a mechanic in the morning, i wish i knew more about car. thanks alot everyone for your suggestions.
|
|
|
07-13-2007, 06:44 PM
|
#20
|
GX Member
Join Date: Jul 2007
Location: Amityville, New York
Posts: 19
|
hah turns out the problems my car was having wasn't from the CAI at all. my Cat. Converter was blocked up. now with that fixed my car runs better than ever.
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 06:06 AM.
|