3.4 Internal Parts

hey do u people know of any internal performance parts for the 3.4 or like whats its limits for boring and stroking, i got 10 gs to spend this summer so i wana spend it right on internals, boring, and flowing and bolt ons, any help is appreciated

[cherrington17]

i'd check the "alero upgrades" link on the main page....

and

check with blackjack. he seems to be doing a complete rebuild of the 3.4L

[Redog]

I know that Mizly motorsports has stage 1 and 2 cam and heads, and a PCM to tie it all togeter

[FormulaNERD]

wow, 10g's and you're going to spill it into an alero.


you're smart.

[jackal2000]

Originally posted by FormulaNERD@May 21 2006, 10:18 PM
wow, 10g's and you're going to spill it into an alero.


you're smart.

Quoted post

lol

go unpimp your auto skyler :P

has any one here bored out the 3400 or know what the limits you can bore it out cause getting the pistons for any size is no prob , just i dont wana shave too much out.

[jackal2000]

Originally posted by dunewolf@May 22 2006, 12:57 PM
has any one here bored out the 3400 or know what the limits you can bore it out cause getting the pistons for any size is no prob , just i dont wana shave too much out.

Quoted post

look up the member "germ" and send him a pm. he isnt so much active anymore but he will get a email about your message.....

thanks email sent.

[jackal2000]

also you can check out www.milzymotorsports.com

[alero440]

Originally posted by jackal2000+May 22 2006, 08:48 AM--><div class='quotetop'>QUOTE(jackal2000 @ May 22 2006, 08:48 AM)</div><div class='quotemain'><!--QuoteBegin-FormulaNERD@May 21 2006, 10:18 PM
wow, 10g's and you're going to spill it into an alero.


you're smart.

Quoted post

lol

go unpimp your auto skyler :P

Quoted post

[/b][/quote]

SO OT, but I love those commercials!

[Redog]

Originally posted by jackal2000@May 24 2006, 10:06 AM
also you can check out www.milzymotorsports.com

Quoted post

Yeah it's a pretty good site. I like that stage 2 cam, and heads.

One member did a 3400/3500 set-up. The 3500 heads and mani should bolt up. I think you could bore out the block to 3500 specs, but I don't know if you'll have to get new pistons

[alerored04]

go check out the last few pages of a thread called pistons on grandamgt.com a few members there appear to have 3.7 bored and stroked 3400's, not sure what it cost them and im sure its super involved. Sorry to sound like a rooster but in this case if you have to ask im not sure that it will be the way for you to go. Having a shop do this kind of work might be close to 10k and its not worth it for an alero motor. go but a 1st gen talon tsi for 2k and drop the other 8k into its motor that will end up being a sub 12 sec car. good luck though.

[springs fastest alero]

Originally posted by alerored04@May 24 2006, 08:37 PM
go check out the last few pages of a thread called pistons on grandamgt.com a few members there appear to have 3.7 bored and stroked 3400's, not sure what it cost them and im sure its super involved. Sorry to sound like a rooster but in this case if you have to ask im not sure that it will be the way for you to go. Having a shop do this kind of work might be close to 10k and its not worth it for an alero motor. go but a 1st gen talon tsi for 2k and drop the other 8k into its motor that will end up being a sub 12 sec car. good luck though.

Quoted post

I'm the one that started the pistons thread on grand am gt.
as for worth it or not
well my car is balls to the wall and it will be faster than 12's by quite a bit
anyway if you want to buld the bottom end or do internals let me know
I've done heads, cams, intakes, bored out engines, my own stroker, boost builds and all motor builds.

putting the all motor engine together this weekend
my boosted stroker has been a long time coming but it will be insane when its done

[alerored04]

very true john, i guess i havent done enough research on what is available and doable.