PDA

View Full Version : Turning Signal


PrImEtImE
11-16-2005, 09:25 PM
I just painted the bezels on my headlights. Noticed that when I put the blinker on, two lights were blinking. Is this supposed to happen??? And it's for both sides so no light is out

j_smith
11-16-2005, 09:39 PM
The outer two lights blink with the turn signal.

mrmike
11-16-2005, 10:17 PM
this is what your signals should be doing...

lights off:
http://www.members.shaw.ca/master_chief/blink1.gif

lights on:
http://www.members.shaw.ca/master_chief/blink2.gif

PrImEtImE
11-16-2005, 11:01 PM
cool, thanks guys for the help. And good idea with the pictures because that's exactly what is happening. Just making sure because I never really paid attention to that :biggrin:

Whitetigerboi83
11-16-2005, 11:07 PM
i looked at mine recently i got leds in the outside and reg bulb in the inside and the led lights up first then the reg bulb looks like its timed to flash that way .. just wish we had a send light in the back i may just wire one in to do the same as the front .. looks sweet

Nik1128
11-19-2005, 01:49 PM
When the ignition is off, the lights blink simultaniously. When you have the ignition on they blink alternatively. (As in Mr. Mikes image)