StockAlero00
02-14-2006, 06:03 PM
Ok I did a search, on engine coolant the best that I could on here. Since not using the search button annoys some people.
Engine coolant was flushed out and replaced at the end of September 05. Right before I went to Niagara Falls- round trip give or take 1k.
In the winter, about December/January- my temp guage would come on and off. I didn't think anything of this- since I thought it was just the weather, and that the engine just needed time to warm up. Come this past month, the light would stay on longer and chime. Ok- so I looked in my owners' manual. Today before I went my emission's testing- I wanted to check the level of my coolant. NOt sure If the coolant has anything do with the test- I just wanted to make sure it was full.
Ok now remind you that just a few months ago, my coolant was flushed and replaced.... I couldn't get the cap off. I had to take a wrench and pull it off. Just the top part of the cap came off. The other part was still what appaered to welded. Took a phillipshead screwdriver and popped it off. I took a look inside, and it looked like no coolant was in there. Looked on the side, and seen taht the coolant was way below the "Full" Level.
My question is having my enginge coolant flushed and replaced 4-5 months ago, should it really be that low? I'm thinking there is a possible leak in it. I am having it serviced tomorrow. My car has 97,048 miles on it. - With this many miles, is it more common to have to keep checking it and filling it back up ?
Engine coolant was flushed out and replaced at the end of September 05. Right before I went to Niagara Falls- round trip give or take 1k.
In the winter, about December/January- my temp guage would come on and off. I didn't think anything of this- since I thought it was just the weather, and that the engine just needed time to warm up. Come this past month, the light would stay on longer and chime. Ok- so I looked in my owners' manual. Today before I went my emission's testing- I wanted to check the level of my coolant. NOt sure If the coolant has anything do with the test- I just wanted to make sure it was full.
Ok now remind you that just a few months ago, my coolant was flushed and replaced.... I couldn't get the cap off. I had to take a wrench and pull it off. Just the top part of the cap came off. The other part was still what appaered to welded. Took a phillipshead screwdriver and popped it off. I took a look inside, and it looked like no coolant was in there. Looked on the side, and seen taht the coolant was way below the "Full" Level.
My question is having my enginge coolant flushed and replaced 4-5 months ago, should it really be that low? I'm thinking there is a possible leak in it. I am having it serviced tomorrow. My car has 97,048 miles on it. - With this many miles, is it more common to have to keep checking it and filling it back up ?