Billet Gas Caps

[battistoni21]

Where could i find the billet gas caps at? I looked for some and couldn't find any...... any installation tip would be helpful if anyone has any.... thanks

[pimpalero2003]

u have to do some measurments on how big the cap is right now but heres a site copy and paste it!

http://www.autosportz.com/accessories_isot...et_gas_caps.htm (http://www.autosportz.com/accessories_isotta_billet_gas_caps.htm)

[14alero]

Those are just covers he wants the whole lid

[pimpalero2003]

sorry didnt read the top part ill search some more for you

[battistoni21]

it's fine, I'm going to try and get ahold of pimpalero03, he had a billet gas cap on his if i remember.......

[pimpalero2003]

http://www.seffects.com/catalog/manufactur...uel+Door+Covers (http://www.seffects.com/catalog/manufacturer_subcategory.asp?Manufacturer=Sparco&SubCategory=Fuel+Door+Covers)

copy and past this this is an actual door with a lock i think this looks really good kinda pricy though if u ask me

[pimpalero2003]

http://www.seffects.com/catalog/manufactur...uel+Door+Covers (http://www.seffects.com/catalog/manufacturer_subcategory.asp?Manufacturer=Sparco&SubCategory=Fuel+Door+Covers)

here you go these look really good and they lock to kida pricey though at least i think!

[justinusaf]

Any billet fuel door from the 94-04 mustang should work. Thats what I had on our alero.
http://invision.aleromod.com/uploads/post-257-1113078602.jpg

[pimpalero2003]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...Y_BIN_Stores_IT (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2490050783&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT)

[Pimpalero03]

who the hell has that screen name ? pimpalero2003. htey need an ass woopin for being like me

[pimpalero2003]

my bad dude at least the numbers are different if you wanna go we can go at it then ill buy you some icecream

[2sidesoftodd]

KICK HIS ASS, SEABASS

[Pimpalero03]

Originally posted by pimpalero2003@Feb 23 2006, 08:16 PM
my bad dude at least the numbers are different if you wanna go we can go at it then ill buy you some icecream
Quoted post



lol no im good. the quesiton though is, is your alero really pimp? mine was. lol

[Alero2k4]

Originally posted by Pimpalero03@Feb 23 2006, 12:29 PM
who the hell has that screen name ? pimpalero2003. htey need an ass woopin for being like me
Quoted post


So what if I made mine pimpalero04??? Technically, I'd be closer than he is...what are you gonna do? Drive up to I.F. and beat my arse...lol Jus' playin '03...bored as hell at work

[Menace]

Im already comming in with the pimpalero06 :)

[Pimpalero03]

lol u guys crack me up

[exnine@gmail.com]

I call dibs on next years pimp alero 07 called it no changies. :P

[pimpalero2003]

its getting pimp my rims go on next week when the tires come in damn people didnt have he tires in but some nice 18 inch chrome i have a trunk im shaving i pin striped my tail lights the center taillights i cheaply and temporary painted to see what it looked liked clared the head lights and painted bezzel black on my silver car 2.5% tint soon i will have sprint lowering springs and kombat kit. and im working on a custom box for 4 15s im getting new 4x6 in the doors and putting 6 1/2 in the door too since every thing is 2 ohm and the only speakers you can get are 4 ohm so im going to wire it to 2 ohm and also im getting 4 6x9s for the rear deck once again to wire down to 2 ohm so soon hopefully my car will be totally pimp oh and i have a 2 door and taking out back seat!
and i really just went off subject on this thread my bad i quess you can close it now i think the guy who started it found what he wanted!

oh yeah and interior is painted

[SweetNLow]

pin striping your tail lights isnt pimp

[GainesvilleAlero]

Using someone elses name isnt pimp either.

[pimpalero2003]

dont have too be a dick 2sweet i like it eventually ill paint them just havent yet makes them look different but if thats all you complain about the pinstripping i must be doing something right

[Pimpalero03]

Originally posted by pimpalero2003@Feb 24 2006, 11:26 PM
its getting pimp my rims go on next week when the tires come in damn people didnt have he tires in but some nice 18 inch chrome i have a trunk im shaving i pin striped my tail lights the center taillights i cheaply and temporary painted to see what it looked liked clared the head lights and painted bezzel black on my silver car 2.5% tint soon i will have sprint lowering springs and kombat kit. and im working on a custom box for 4 15s im getting new 4x6 in the doors and putting 6 1/2 in the door too since every thing is 2 ohm and the only speakers you can get are 4 ohm so im going to wire it to 2 ohm and also im getting 4 6x9s for the rear deck once again to wire down to 2 ohm so soon hopefully my car will be totally pimp oh and i have a 2 door and taking out back seat!
and i really just went off subject on this thread my bad i quess you can close it now i think the guy who started it found what he wanted!

oh yeah and interior is painted
Quoted post



i doubt u ahve seen the alero i owned. having a poop load of speakers doesnt do much for a car besides make it loud. i got my gascap off ebay made for a 94-04 mustang. takes fabrication to make it fit though.
http://www.cardomain.com/ride/679915

[Eh_nigma]

If you're still looking... for that gascap that is... I used the ones made for an F-150, did a bit of shaving down (a bit is a BIT, not a lot at all), and threw it in there... really, it was as simple as that...

[pimpalero2003]

i want a loud system i smoke a lot so ill die of lung cancer long before i go deaf im not going to doubt yous but when i get mine totally finished i might be able to give you a run for you money

[pimpalero2003]

yeah ur car is tight i want toget bags so bad maybe i will eventually

[cavaliers60]

just a question and kinda related to the subject, but is anyone else's factory gas lid a little flimsy like my lid is???? :huh:

[turtles_ride]

mines started to not spring back as much, but only this winter, might just be slat and dirt build up since the last time i washed it. Changing to the new billet one will take care of that.

[halfJ99]

Originally posted by Eh_nigma@Feb 25 2006, 03:01 PM
If you're still looking... for that gascap that is... I used the ones made for an F-150, did a bit of shaving down (a bit is a BIT, not a lot at all), and threw it in there... really, it was as simple as that...
Quoted post



what did you have to trim..and what did you use to do the trimming with

[Eh_nigma]

the curve of OUR gascap (because of the contour of the panel) called for some shaving down along the forward area. And it was done first with a course file, then a finer file and then I just buffed that... total time of work and installation was roughly an hour. That also included drilling first pilot holes then full size holes to fit the screws along the outer edge...

[Eh_nigma]

wish I had a picture of it, but Justinusaf's picture comes pretty close.

[Pimpalero03]

i did a pic by pic how to on this guys. its on the boards somewhere

[Eh_nigma]

very similar to that, except there is no notch cut out (where you would lift the cap), instead it is on a magnetized button... I liked the clean look (and why I'm removing it to throw in something completely different in the next little bit, yeah...)