PDA

View Full Version : Car Window

XC runner
03-12-2006, 01:17 PM
Alright so the other day i was going to the movies, and after i started my car i tried rolling down my driver side window, and it didn't move just sat there. But you can hear the motor still moving, just the window sits still. Does this mean that it got off track? And if so, how would i be able to fix this without taking it to a shop?
Menace
03-12-2006, 01:57 PM
It could mean it came off the track, your tracks bad, your motors bad, or the clip holding your windows broke. What you need to do is a search in how to archive for how to take off a door pannel. If you cant find it then pm me and ill explain. Its cake.
XC runner
03-12-2006, 03:10 PM
Alright i got the door off, and the track is fine, the motor is fine, but somehow the white bracket that is glued to the bottom of the window glass broke, so everything is fine mechanically, its just the white plastic brackets holding the glass to the track actually snapped, where could i buy replacements, and does anyone know how i could get that window out of there to glue new ones on and fix it?
alerocar01
03-12-2006, 03:17 PM
you could try any GM dealership
hpt_playboi_03
03-12-2006, 04:38 PM
That same thing happened to me right before I came on deployment. My window wouldn't go down at first...and then out of nowhere it would just drop down. I took mine to the dealership and they were going to charge me too much, and they told me to go to a glass place (somewhere that replaces auto windows and junk) and they did mine for like $15.
aleroracr925
03-12-2006, 08:33 PM
yea same thing happened to me but i was rolling my window up and it was off the track.... so i took off my door panel and the clips were broke.... i still never got mine fixed but i need to do that so let me know where you got the clips and how much thx good luck
Menace
03-13-2006, 05:49 PM
my clip broke so i went to the store and bought pc7 a really strongass glue and glued it back together, its been fine since.
doubleN0alero
03-13-2006, 05:51 PM
check out this thread my friend...

http://invision.aleromod.com/index.php?showtopic=16474
UnoWHO
03-13-2006, 10:29 PM
wait...i had the same problem but mine didnt use white clips to hold it on??? I am really confused...my window is glued from factory to a black holder the width of the window and like 1 inch deep...what happened to mine was the glue got hot and slipped off the window so I had to re-apoxy it...does this sound like all your setups or do I have a poopty aftermarket setup I didnt know about till now....