View Full Version : Would These Be A Good Deal?
battistoni21
03-16-2006, 12:12 PM
I was searching on ebay for the reverse halo gauges and I found these for a really good price. I found others from a website but they are for $60 bucks. These are alot cheaper, but I don't want to buy these and end up getting ripped off or getting the wrong thing.....
Here they are:
http://cgi.ebay.com/ebaymotors/WHITE-Face-...sspagenameZWDVW (http://cgi.ebay.com/ebaymotors/WHITE-Face-Oldsmobile-ALERO-1999-2004-Gauges-Olds-64_W0QQcmdZViewItemQQcategoryZ43952QQitemZ80468421 24QQrdZ1QQsspagenameZWDVW)
Also if anyone could tell me about the "digital inverter" i'd appreciate it.... thanks :biggrin:
doubleN0alero
03-16-2006, 12:23 PM
those aren't reverse halos...those are just white face light up gauges...
battistoni21
03-16-2006, 01:35 PM
Thanks for the info, I searched ebay, and i couldn't find any reverse halo gauges for the alero :( hopefully some of them come up soon..... Thanks again
littlebandito
03-16-2006, 01:57 PM
If you want reverse halo gauges you should check out www.speedhut.com. Its not exactly cheap, but its customizable. As for the inverter, I may be wrong but I think it has something to do with the colors or whatever.
LDR92801
03-16-2006, 07:52 PM
This is what you want
Halo Guages (http://cgi.ebay.com/ebaymotors/1999-2003-Oldsmobile-ALERO-White-Face-Glow-Gauges-160_W0QQcmdZViewItemQQcategoryZ43952QQitemZ8048302 809)
and yes they are very reliable and look great got mine about 2 months ago
Alero2k4
03-16-2006, 08:16 PM
When you put on these gauges, do you have to remove the stock black face??? Wouldn't it be dim if you didn't???
battistoni21
03-16-2006, 09:08 PM
Thanks for your help guys, did you order that inverter with your halo gauges? If so, does it really change the colors?
Menace
03-16-2006, 09:10 PM
Yes it does, changes it from blue to green. I like it but dont need it. No you dont take off the black I think its impossible. It just goes right overtop, you dont even need to take off the needles.
battistoni21
03-16-2006, 09:23 PM
sweet, thanks menace, I think im gonna go with the white faces with the inverters... i think they are gonna look pimp, i might add in a chrome bezel as well
Naich
03-17-2006, 12:53 PM
You can remove the black factory guage overlays if you want, but it is a huge pain in the butt. Before they made these types of overlays, they made what were basically decals you put over the black parts. You had to take the black part off from the base as to not get water in the electronics when you mounted the decals (you use water so you can line them up right). Basically, you need to use a hair dryer and heat the glue up and peel it off slowly.
But for these guages and speedhut guages, you can basically just slap em on with doubleside tape, just make sure they're lined up with the dummy lights. These things make their own light, they don't use any factory bulbs.
AlbinoMonkeyRat
03-17-2006, 01:08 PM
I would recommend the Speedhuts over the halo/reverse halos anyway. The Speedhuts don't look like swiss cheese with all the holes for the dummy lights (top segments above the fuel and temp guages)
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.