Turbo/supercharger

[rollinpropercc3]

guys...i want a supercharger...but the only one i find is from rsm for $4500....does anyone know of anything cheaper or some mod that will do tHA same....i want tha blow off valve noise... & THA hp....


vvrrooommmm...pisss...vrrroooommmm....pisss


HAHA

[Spilner521]

there's the GM supercharger kit that was just released for the ecotec engine but that won't get you the blow off valve noise because there's no blow off valve. you could get the RSM kit like you said, but its pricey and i've heard of a lot of people having problems with it. then there's the Hahn Racecraft turbo kit for the ecotec, but the intercooler piping was made for a manual tranny, so you'd have to fabricate your own pipes.

then there's the option of building your own turbo kit piece by piece. in my opinion, this is the most cost effective way to boost your engine because you get to select what parts you want to have and where you buy them, instead of having a premade kit with certain parts you might not neccessarily want.

[BlackJack]

hahaha, or if like you said, you just want the BOV sound (psssh), there's a rediculous little horn BOV kit that imitates that sound when you hit the horn button....but I prefer the real thing.

http://cgi.ebay.com/ebaymotors/Universal-T...050586271QQrdZ1 (http://cgi.ebay.com/ebaymotors/Universal-TURBO-BOV-SOUND-Horn-Whistler-Blow-%20Out_W0QQcmdZViewItemQQcategoryZ33742QQcmd%3Cbr% 20/%3EZViewItemQQitemZ8050586271QQrdZ1)

[rollinpropercc3]

def. prefer tha real thing...but my car is a 5 speed....ya'll mentioned fabricating my own...i wouldn't know where to begin....anywhere to get instructions manual etc?? and how much (estimate) would it differ?? rsm $4500 vs buildin my own $$$???

[Alero2k4]

check out Hahnracecraft.com ....

[SilverBullet256]

dude if you want an s/c just get the gm s/c for the ecotec, its only like 2800 and it has everything you need to bolt right on, except you need to get your pcm reflashed at a gm dealership that will do it

[Spilner521]

Originally posted by rollinpropercc3@Apr 16 2006, 06:36 PM
def. prefer tha real thing...but my car is a 5 speed....ya'll mentioned fabricating my own...i wouldn't know where to begin....anywhere to get instructions manual etc?? and how much (estimate) would it differ?? rsm $4500 vs buildin my own $$$???
Quoted post

try this http://www.j-body.org/forums/read.php?f=40&i=56976&t=56976 it's a general parts list if you want to make your own turbo kit. also read through the FAQ's at the top of the Boost forum on that site...here's a link http://www.j-body.org/forums/list.php?f=40

since you do have the 5 speed, you could contact Hahn Racecraft (http://www.hahnracecraft.com), they make ecotec turbo kits for cavaliers and sunfires. since aleros have the same ecotec, it might fit. only thing i can think of is that the intercooler piping might need to be modified a little since our frames are different from the j-bodies. but for the most part it should fit. give them a call or send an email and ask if they've ever tried it on an n-body.