View Full Version : Rear Springs Rattling
Lovestheh20
04-28-2006, 12:37 AM
alright, so I just got some sping tech's installed a couple days ago w/brand new monroe sensatracs. and I have this rattle coming from the right rear wheel well.. it sounds like something is loose?
the rears are fully aligned, caster, toe, and camber.
the guy who installed it said I have to be careful when I jack the car up because the springs don't stay tight like the fronts do, and can slide out of position. anyways, the car hasnt been jacked up at all since the install.
anyone else here have springtechs and can chime in?
2fst4u
04-28-2006, 12:41 AM
yeah, constant problem. just wait for the pop sounds from the front end. eag182 was whining about this the other day. lol
btw, nice front struts.
Lovestheh20
04-28-2006, 12:42 AM
the fronts worked out like a charm bro. :)
its the rears that are giving me problems! I can't stand these crap WI city streets.
UnoWHO
04-28-2006, 06:54 AM
The fronts will squeak when it gets rainy, or humid, it sucks lol
eag182
04-28-2006, 11:00 AM
fronts shouldn't. rear right should LOL. Yea, 2fst4u, it gets annoying. It will only happen when lateral stress is put on the tire, i.e. TURNING.
Lovestheh20
04-28-2006, 04:19 PM
eag - do your rears sound like something is loose?
my rears squeek after installing my springs sounds like its coming from the middle wishbone lubed it still same thing.
eag182
04-28-2006, 04:54 PM
sounds like a croaking noise
nothing sounds loose
Lovestheh20
04-28-2006, 05:17 PM
oh no, I get a definate rattle like there is a bolt loose or something.
eag182
04-29-2006, 04:13 PM
so tighten it
alerotuner99
04-30-2006, 08:23 PM
i have the same problem on my alero. I put intrax springs on sensatrac struts and i have the same rattle in the rear. I did all the work myself too installing the springs and struts and doin the alignment since i work at a dealership. It seems to me they rattle because my rear springs don't have the rubber insulators on the bottom of the springs like the fronts do. i'm not sure if u could put some kind of rubber insulator underneath the spring to fix the problem.
ptrudel
05-01-2006, 03:33 PM
man i've had mine on for over 2 years and they dont make noise at all...except the front recently from bein jacked and put down about 10 times..but once i start driving, it'll get back into place and stop...i dunno why you guys are havin problems
Lovestheh20
05-02-2006, 01:49 PM
alright, well I finally tried getting the bolt on top of the strut mount tightened.. didn't do anything. The sound is coming from the washer underneath that bolt. does this setup need spacers or something? I thought the only struts that needed those were KYB's
steve-o
05-02-2006, 02:01 PM
dont know what to tell you dude, i got ST and kybs on my car now and have no problems with anything like that. i did use all the rubbers and stuff when i did the install, no metal on metal.
alerotuner99
05-02-2006, 06:02 PM
so is there supposed to be rubbers underneath the springs in the rear cause mine didn't have any when i took it apart. I did notice my swaybar bushings in the rear are pretty worn and could be making most of the noise.
steve-o
05-03-2006, 09:15 AM
there was a little plastic piece, the bushing might be an issues too, now that its dropped, more stress on the bushing that might be already on there way out.
kaularo88
05-16-2006, 11:49 AM
have you checked the strut mounts? thats what was making the loose bolt sound in my car. :)
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.