which bodykit?

[greenbastard]

I was wondering which bodykit I should go with. razzi or kato kombat. I want to know which one is easiest to put on because I want to do it my-self but I haven't done body work before. If I can get a bolt on or something that doesn't require molding it into the quarter panel that would be better.

[Naich]

no matter what you get, it will require a lot of elbow grease.

The aas kato style kit is a replacement for the stock front and rear bumpers, while the razzi molds on to the stock bumpers.

[greenbastard]

no matter what you get, it will require a lot of elbow grease.

The aas kato style kit is a replacement for the stock front and rear bumpers, while the razzi molds on to the stock bumpers.


so you have brake out the bondo and mold it on the the stock bumper.

[elitecloud]

with the kato, you have to completly remove the bumpers and install the new ones

with teh razzi, you leave the stock ones on, the front bumper is held on by 2 sided tape, i belive the same with the back, also with the back you might have to cut the bottom of the bumper off a few inches...not sure tho

and the sides on the razzi are reveted on i belive...

:-D

[SweetNLow]

naich isnt completely correct when he says the razzi molds to the front bumper.

the razzi kit is a bumper cover kit that glues and screws over the exsisting bumper. so you dont actually remove the stock bumpers the razzi kit just fits over it.

and on the other hand the kato kit are full bumpers

[greenbastard]

what about the side skirts???

[SweetNLow]

ok elite cloud is sorta correct........ you attatch the razzi bumper with high strength epoxy...... i woudlnt recommend 2sided tape..... and then your put afew screws in the kit in the wheel wells.

same thing with the skirts....... high strength epoxy and screws in the wheel wells

[SweetNLow]

razzi side skirts fit right over the existing side skirts..... not sure bout the kato but i think they fit over hte stock skirts as well

[greenbastard]

ok elite cloud is sorta correct........ you attatch the razzi bumper with high strength epoxy...... i woudlnt recommend 2sided tape..... and then your put afew screws in the kit in the wheel wells.

same thing with the skirts....... high strength epoxy and screws in the wheel wells


what would you pick. I'm thinking razzi plus my buddy owns a store in Regina called Cubed Productions and he said they can order that kit.

[whiteliquid]

Look at both the kits and figure out which one YOU want

[SweetNLow]

here are a couple of cars with the razzi kit. personally the razzi is my favorite kit but my opinion is biased cuase thats what i have.

http://i63.photobucket.com/albums/h138/ardski/Brent003.jpg
http://i63.photobucket.com/albums/h138/ardski/bags5.jpg

[greenbastard]

Did you do it yourself?

[whiteliquid]

dude brent do you ever miss the days of your ho being black...I like it a lil better that way...

kato--
http://i4.photobucket.com/albums/y113/LILD23/9.jpg
http://i4.photobucket.com/albums/y113/LILD23/DSCN1190.jpg

[Naich]

naich isnt completely correct when he says the razzi molds to the front bumper.

the razzi kit is a bumper cover kit that glues and screws over the exsisting bumper. so you dont actually remove the stock bumpers the razzi kit just fits over it.

and on the other hand the kato kit are full bumpers

Um, yeah I am right. It goes over the existing bumper. It doesn't replace the stock bumper. Call it gluing it on, or call it molding, whatever, that is what I meant.

But also, make a mental note that a stock razzi kit is not going to look like sweetnlow or sound_xtreme's kits because they actually molded them into the bumper to get rid of the lines. A stock razzi kit will still have lines between the stock parts and the razzi parts.

[SweetNLow]

Um, yeah I am right. It goes over the existing bumper. It doesn't replace the stock bumper. Call it gluing it on, or call it molding, whatever, that is what I meant.

But also, make a mental note that a stock razzi kit is not going to look like sweetnlow or sound_xtreme's kits because they actually molded them into the bumper to get rid of the lines. A stock razzi kit will still have lines between the stock parts and the razzi parts.

um ya you are wrong. like you said molding it on is what me and joel did. they are simply bumper covers.

i knew what you ment nick but the way you worded it made the kid confused

[Naich]

molding isn't an exclusive term. maybe it wasn't the best word choice. but it doesn't make it wrong.

[clutch1]

They both look good. If you get the Razzi you should do the molding required to get rid of the lines, it looks A LOT better that way.

The kombat kit looks good in the right instances, too, but if not done right it'll look really ricey (like the cars you usually see pictured in the kombat advertisements.)

[SweetNLow]

greenbastard- joel and i molded my razzi kit into the stock bumpers. its not difficult but you still need to know what your doing.

whiteliquid- sometimes i miss my car being black..... but it feels like a totally different car now that its orange. it just feels more "custom". plus i haven yet added the stripes i intend to put on the car so it will have a different look to it once i put them on.

[jackal2000]

plus i haven yet added the stripes i intend to put on the car so it will have a different look to it once i put them on.
stripes are for fags

[clutch1]

But crooked red pinstripes on the other hand.. :P j/k

[BlackJack]

stripes are for fags

Yeah, that's right stripes are for yard darts.

[SweetNLow]

stripes are for fags

blowing smoke out your tailpipe is for fags haha

[whiteliquid]

stripes are hawt if done tastefully....as in the new mustangs.But they can be fugly....as in if they are bright neon colors put on a geo metro with a spoiler and bright neon colored rims .............. I'm pretty sure sweetnlow hasn't had a bad mod so far, so it's prolly gonna turn out good

[jackal2000]

blowing smoke out your tailpipe is for fags haha
too bad thats not true anymore ;)

Yeah, that's right stripes are for yard darts.

thats not true anymore either! no more jumpin for this guy. at least i can say i have been there and done that. :p


and neither of you can take sarcasm, gawd.

[SweetNLow]

i take sarcasm with the best of them biotch

but if you crack on me im gonna crack back mofo........

oh geez now im talkin like that wigger from jersey wtf is wrong with me dogg

[BlackJack]

and neither of you can take sarcasm, gawd.

aw....I think I took it fine, I'm not knocking on your door am I?

Sorry if I offended you bro. I'll make sure and warn you in advance so you can get more tissue next time :p

[joker]

Just wondering if this club qualifies for this discount? (http://www.andysautosport.com/clubdiscount/) Cuz these guys have both the body kits.

[Oldsman]

stripes are for fags

that is why brent is getting stripes

[sound_xtreme]

uh wow, ya.....get razzi and mold it in, or have someone mold it in

[SweetNLow]

that is why brent is getting stripes

i love me some stripes.

scott your the one sporting the gaywad single earing? you shoudlnt be commenting on my sexuality bud! haha

[whiteliquid]

BJ says stripes are for yard darts....doesnt the car in his sig have stripes ????

[AlbinoMonkeyRat]

^ trust me, you don't want to get in the middle of THAT. a homophobic sarcasm war is the WORST thing a n00b can comment on.

[battistoni21]

^^^ agreed!!!!!!

[Oldsman]

i love me some stripes.

scott your the one sporting the gaywad single earing? you shoudlnt be commenting on my sexuality bud! haha

you just wish i was gay that way i could bend your ass over. besides you might want to do some research on earrings and gay............dumbass.

[FartCannonAlero]

haha this whole thread has made me giggle

[steve-o]

^^^ like a little school girl?? hahah

[ImSoBored]

stripes are gay

[slowandlow]

if i do a kit i will eathe r do the banned kit or the razzi or if it ever gets made the osv kit and emphsis on ever gets made