which looks better?

[`2000redalero]

they're both called 'silver'...

which one though?

[`2000redalero]

...

[`2000redalero]

17's btw

[j{}n]

the first ones are badassed

[Pimpalero03]

2nd ones are tight.

[boarder211]

2nd ones get my vote

[alero168]

2nd one

[quitlahok]

style of the second in the color of the first :D

[Redog]

2nd ones

First might look chorme in the pic but they are porbably both the same color

[Naich]

they're both pretty nice, but I'm voting for #1 since I have already seen similar ones to #2 on aleros!

[Skiboarder311]

#2 DEFINATLY #2!!!!!!!!!!!

[99blackalero]

#2 but with the first ones finish

[havik]

I like #2

[`2000redalero]

wow! didn't know everyone checked the forums this late! lots of awesomely fast AND quick responses in less than an hour. Anyone else that has opinions they are greatly appreciated still :D

now I just have to find hubcentric rings? cause they only have 114.3 available :(

[King Asoka]

2nd one

[jonez]

1st Ones

[chicken_dog]

Get these in 17x8 or 18x8 and you don't need to find the rings they come in 5x115 and get them in polished.

[johny_boy32]

get the second ones

[`2000redalero]

Get these in 17x8 or 18x8 and you don't need to find the rings they come in 5x115 and get them in polished.
where at? how much?

I'm asking about the ones above because I'm getting a wheel and tire package for like $500...

[justinusaf]

No. 2 definitely

[misslindseysue]

I like the 2nd one much better.

[2004 STEELGREY 3.4]

Definitely the second ones!! :thumbsup:

[Daytona]

I like the 1st one better.

[sparkey]

The second one's look sweet, go for those!

[blueyezalero]

The 2nd ones look good!

[3.4Alero]

2nd one.

And by the way (lecture time)....

Just because the bolt pattern is 5x114.3, it doesn't mean that hubcentric rings are necessary. You will ALWAYS have to be a little more careful with that bolt pattern, because it is not quite right.

Now... hubcentric rings are for the center bore, so that the HUB holds the weight of the wheel, instead of the STUDS / LUGS holding the weight. If your centerbore is off, and you don't get the rings, you will at the very least experience some shaking, and at the worst, you will snap a wheel stud off. Call the wheel manufacturer and ask what the centerbore is for that wheel / size. Stock centerbore is 70.3 mm (thanks mfuller). If the distributor you buy the wheels from does not supply them, call some place like discount tire direct, and tell them the sizes. They will be able to help.

In conclusion, get the correct hubcentric rings for the wheels to fit an alero, and then check your lugs a little more often, just to be sure the off-pattern is not causing them to loosen.

[`2000redalero]

Thank you thank you thank you

[AleroAngel83]

It was a hard choice, but I think I'd have to vote for #1. Either would look hot tho, you've got 2 nice styles to choose from.

[Crazy_Canuck]

I like them both, but if I were forced to choose, I'd go with the first set.

[j{}n]

so you know where to get the first ones with tires for 500? let me know about this, i really like those a lot, and i've been shopping for summer rims

[rowdygls]

or where to get the second ones for 500 let me know :D

[Final-Reality]

#3 for sure :ph34r:

[alerosport.com]

Number One!!!

[Rubered00]

definatley the second ones!

[`2000redalero]

Originally posted by Final-Reality@Mar 17 2004, 09:38 PM
#3 for sure :ph34r:
... :blink:

[`2000redalero]

http://www.airdynamicracing.com

Products...AIR wheels...

[dopey]

neither............ rivets are gay.

[`2000redalero]

crap now I can't decide, I ordered the first ones, but i like the second one's shine... how much does it cost to get stuff dipped in chrome?

#1

[`2000redalero]

...

[`2000redalero]

which one now??!?!?!? ah!

[3.4Alero]

Since you have now ordered them, this thread is closed. Continue all discussions here:

http://invision.aleromod.com/index.php?showtopic=2642