Replacing The White Clips

[ghostface20]

I know this is a common question on here and i found alot of info on what i need to buy but i cant find anything that shows me how to install them in the door. its just the little white plastic clips 2 of them that i found in the bottom of my door when my window fell down. im going to buy 2 new ones from the dealer but im not sure exactly where they go.

any info would really be a big help.

the best thing i found to help me with this on this board was this post Here (http://www.aleromod.com/forums/showthread.php?t=14701&highlight=window+clips).but i dont need to replace the metal piece or sash.

[sound_xtreme]

theyre glued to the bottom of the window, there should either be glue left on the window or spots where you can see where they were on the glass

[super white alero1]

Glue will not work you have to use a composite glue. Sumthing like JB Weld. Get a two part kit and mix it togather.

[ghostface20]

thanks alot. i dont see where they where glued previously i might just take the door panel of the other door and use that as an example. iwill look for that glue though. :cool: