Lake in my fog lights... not good..

[cavaliers60]

I need new foglights...... :cry: I just noticed tonight that I have a LAKE of water in my foglights where I put my LEDs in... :( This is not fun.... I'll have pics posted up tomorrow....

[Satsuriku]

lol and i was thinking about doing that with LED's...........thanx for helping me with my decision

[CiscoPath]

....................................ya know, there are some many things that COULD be said about the title, but I could pick one. When you resealed the housing did you use the old sealant? If it's anything like opening up the headlight to clear the corners, you may want to apply a nice small bead of sealant around it the LEAK

[greenbastard]

find where the water is coming from and silicone then living shit out of it. if it is coming through by the bulb (i don't know if that's possible i have after markets) go to the hardwear store and buy 3M foam gasket stuff or something like that.

[SweetNLow]

just take a very small drill bit and drill a very small hole in the bottom of the lens for the water to drain out of

[cavaliers60]

I know I sealed it right.... I double checked everything.... I'm going to check it tomorrow to see if anything came loose.... It really sucks though... I think it shorted out one of my LEDs....

[Oldsnut]

just take a very small drill bit and still a very small hole in the bottom of the lens for the water to drain out of
Best advise I can think of.

[CiscoPath]

I know I sealed it right.... I double checked everything.... I'm going to check it tomorrow to see if anything came loose.... It really sucks though... I think it shorted out one of my LEDs....

Not to be a dick, but if water got in, something had to be missed. Maybe a spot you didn't even think about. The drill bit idea is your best bet

[cavaliers60]

I'll look at it tomorrow and let you guys know.... I'll even take a pic of the water in it..... :)

[cavaliers60]

So I have the pictures.... Just give me a minute or two to post a couple of them up...

[cavaliers60]

Well, here they are for your viewing pleasure... :( It makes me sad.....

First one here is the one I noticed when one of the blue lights didn't blink when I unlocked my car.... notice the water lines.....:(:(
http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem001.jpg



here are some more.... the NEW fog lights I bough are rusting out..... GRRRRRRRRRRR:mad2::mad2::mad2::mad2::mad2::mad2::m ad2::mad2::mad2::mad2::mad2::mad2::mad2::mad2::mad 2::mad2:

http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem003.jpg

http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem004.jpg

http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem006.jpg

http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem014.jpg



I should note that there wasn't any visible holes around where I put the LEDs in.... but there are some cracks on the lens.... I'd say, I need new foglights.....

[cavaliers60]

I guess I"m going to be getting new Foglights.... Turns out, there is more than one leak.... There are cracks around the back in little hidden places as well as the lens itself.... So IF anyone is selling some fog lights or knows where I can find a pair, let me know please! I just bought those lightbulbs for the fog lights no more than three months ago and they are rusted up pretty bad....

[Mischief007]

Only place I found them here in Canada was at the dealer. :( $150 CDN each. :(

[cavaliers60]

I'm going to a junkard tomorrow to see how much they would be there.... other than that, my car is without foglights for a while... :(

[teflone]

I have a similar problem.. mine are dirty..

I happen to be looking around and pulled out my foglight, and there was a fair amount of rust on the bulb end, pile of it..

But anyways..

with your picture it looks like the fogs can be removed very easily ?

is it.. ? never touch the beggers yet, I wanna clean them up.. or take them out period..

[cavaliers60]

Just remove the headlight case, and look straight down... there are two small bolts holding it on... I can't remember the size though... sorry... Just unscrew them and pull it on up... The one on the driver's side is a pain to get out cause the hole just isn't quite big enough... Just wiggle it around and it should come up.. Just put some muscle into it. lol The other one is a breeze.

[Mischief007]

10 mm ;).

[cavaliers60]

Here's what it looks like with the headlight assembly removed...


http://i24.photobucket.com/albums/c26/cavaliers60/foglightsproblem005.jpg

[teflone]

beauty! thanks for the tip..

Im going to grab em now.. lol bring them inside outta the cold..

[whiteliquid]

one of my stock fogs just went out...the bulb is not blown so it must be electrical...

[cavaliers60]

It probably is.... It's in a REALLY bad spot from my experiences.... One of my plugs is getting a little rusted up from the water..... that stupid gap around the headlights leak water down there like no other!!! I think that's why everything was so rusted.... I'm going to break apart the fog lights and snap some photos later on...