good deal?

[elitecloud]

I just went to a garage sale and picked up 2 - JL Audio 12WO-4's for $10 a piece, i don't have my amp anymore but i can test them monday, and i was wondering if this was a good deal or not.

I've heard good things about JL, but i've never heard them for myself, so let me know :-)

Thanks Guys

and a picture for shits and giggles

http://www.feelsound.co.kr/shop/img/item/19_s.jpg

[billytheman1188]

lmao, JL audio is a great brand. if they work, $10 is fuckin awesome! you got lucky

[Ryan from Ohio]

Ya they sold for about $100 new each, sometimes less or more depending on location and possible sales.

Decent little subs, very low xmax... very...

[FrankTheTank]

i used to have some w0's, they were pretty nice.

[billytheman1188]

my cousins bf has 4 10' JLs in his blazer and hes had them for a few years now and loves them. they hit very nice

[antichrysler]

That's a pretty good deal... I'd put an amp on em

[elitecloud]

hooked em up to the house radio and it worked, got sound and clean movement...so excited!!1

[HazMatt24]

that's a smoking deal since they work

[strtrydr]

hooked em up to the house radio and it worked, got sound and clean movement...so excited!!1

now I gotta hear them ... plus I gotta see the truck too!

[elitecloud]

i just want to really run one sub, and i want a cheap amp

will this one work?
http://www.walmart.com/catalog/product.do?product_id=5741070

Specifications:
Output power (4 Ohm, <=1% THD): 125 Watts x 2
Output power (4 Ohm bridged, <=1% THD): 380 Watts x 1
Output power (2 Ohm, <=1% THD): 190 Watts x 2
Signal to noise (1 Watt into 4 Ohms): 75 dBA
Dynamic power (4 Ohm): 130 Watts
Peak music power: 760 Watts
Number of channels: 2
Load impedance capability: 2~8 Ohm (Stereo); 4~8 Ohm (Bridged)
Continuous power (4 ohm): 125W x 2
Continuous power (2 ohm): 190W x 2
Continuous power bridged (4 ohm): 380W x 1
Frequency response: 10Hz ~ 50kHz
Total harmonic distortion: 0.015%
Signal-to-noise ratio: >95dB
Dimensions: 11-13/16" x 2-3/8" x 13-1/8"
Features:
Bridgeable
Channel # capability: 2/1
PWM regulated MOSFET power supply
Screw-type speaker terminals
Balanced isolator input circuit
RCA Inputs: 2 channel
Speaker level input: 2 Channel
Input level control: hi-volt (400mV ~ 6.5v)
Built-in crossover selectable LPF
Crossover frequency range: 80Hz, -12dB/Oct.
Bass level control: 50Hz, 0/6/9/12dB
Warranty: 1 year

[HazMatt24]

seriously, avoid Wal-Mart audio. Drive up to Tempe and go to Chronic Car Audio if you want a decent amp cheap. You could probably find an MTX amp cheap (they are made here) or Rockford (they are made in Tempe, over off Baseline west of Mills Mall) on craig's list or check the New Times

[elitecloud]

This one?

http://cgi.ebay.com/ALPINE-MRP-M450-CLASS-D-V-POWER-MONO-AMPLIFIER-AMP-NEW_W0QQitemZ170109434336QQihZ007QQcategoryZ64570Q QtcZphotoQQcmdZViewItem

[elitecloud]

aight, i had a Kicker 300.2 and a Kicker Roadthunder, i liked the kicker it hit harder, but cut out sometimes, i should save up then :-(

but i will buy a cheap box till i can save up and get a custom one

like i want this box

http://i114.photobucket.com/albums/n275/looneytwin/tacobox1.jpg

[steve-o]

off topic, but nice truck. If I were to buy a truck, it would be a x-runner.

[elitecloud]

Problem, big problem

I guess cuz it's Arizona, and the guy is a complete a-hole, i powered them up today, and umm the cone is fine, but that outer edge part that connects the cone to the actual housing is all rotted out, it was ok when i bought it, but i guess i was too excited to REALLY check it, is there some sort of repair kit for this or am i out 20 bucks?

The cone and everything else sounded good, and it pounded...please help




X-Runner Loves gas, 45 every 280 miles, 16mpgish, ouchiebibbles
and i can't drive a stick like a pro yet, that doesn't help either

[strtrydr]

^damn dude

[AGT]

Problem, big problem

I guess cuz it's Arizona, and the guy is a complete a-hole, i powered them up today, and umm the cone is fine, but that outer edge part that connects the cone to the actual housing is all rotted out, it was ok when i bought it, but i guess i was too excited to REALLY check it, is there some sort of repair kit for this or am i out 20 bucks?

The cone and everything else sounded good, and it pounded...please help




X-Runner Loves gas, 45 every 280 miles, 16mpgish, ouchiebibbles
and i can't drive a stick like a pro yet, that doesn't help either


There is an audio shop around here that repairs butyl rubber surrounds but they note that they do not guarantee the quality or life expectancy of the original manufacturer.

You might ask some stereo shops otherewise get to melting some rubber.

Are those even rubber or are they the foam?

Please use a rubber when pounding...it is the safest option.

[elitecloud]

AGT, if you can get me a number, i call and see about if they can fix these or not...thanks

[AGT]

Confirm they are Butyl Rubber...I will look for that shop...some low key audio distributor so give me a lil time...seems like the best stuff comes from the grey market

[elitecloud]

ok, tell me about this set up then

http://www.sonicelectronix.com/item_4243_Alpine+SWR-1222D+-TYPE+R-.html

Sub, duel 2 ohm Alpine Type R $$138.78

http://cgi.ebay.com/06-HIFONICS-TITAN-TXI6006-2-CH-POWER-AMP-BRAND-NEW_W0QQitemZ140126710574QQihZ004QQcategoryZ39732Q QrdZ1QQcmdZViewItem

06 HIFONICS TITAN TXI6006 $$137.5


600 Watts bridged @ 4 ohms (series)

http://www.crutchfield.com/S-nU1aMBOj8Bb/cgi-bin/ProdView.asp?search=Alpine+CDE%2D9852&i=500CDE9852

Alpine CDE-9852 Deck $$149.99




Bringing the total to 426.27, without a box, i already have the wires and everything i think i have 8 or 4 gauage i there now, probabbly 8...