PDA

View Full Version : Help.


Steven01
08-04-2007, 10:45 PM
Im a Broke Man. But I want to do as much to my alero as i can. But you see I just do not have enought money to make this looks NICE! I just graduated Grade 12 and started full time job. and I already have a work inprogress car to Finish my Mucel car ( 73 Nova ) But Im just wondering what is the easyest and cheepest things i can do ( My Self or pay for ) to make it stand out a bit. Im not sayin IM BROKE just only get to spend about 300 bucks a month on it. I have a system already. No tint :( almost had 15% all around but canceld becase the jerks did not show up and made a excuse. )

any sugestions Let ME know I know thiers alot i can do that cheep and will change it alot.

( Yes In the 3rd Pictures you can see 2 dents Its a long story But im going to tell you. a week or 2 ago me and my buddie where just hanging out at the skewl playing some basketball. we where about to leave and some of his friends showed up . But what do u know they were pised at him for something. he told me to drive. soo i DROVE. one of the kids JUMP KICKED my car and put 2 dents and scatches never reported it didnt do anything. This winter Im thinking about repainting it Becase my dad knows how to Paint GOOD. I graduated school with auto body soo i can fix it easly. But any sugestions on color that would be great. evan if you could do something up on the internet as exampls that would be great. thank for lisinting to my story.
thank you steven

pimpalero2003
08-04-2007, 10:48 PM
big thing for cheap would be clear ur coroners 5 bucks tint tails 15 bucks lowering springs 50 bucks off ebay

pimpalero2003
08-04-2007, 10:51 PM
and take molding off the sides

Steven01
08-04-2007, 10:51 PM
Okey well people told me about clearing corner Would you be able to Tell me how to do this. ive looked on ebay and this car will be winter drivin as my Nova Wont. And i was looking for coil overs?

pimpalero2003
08-04-2007, 10:55 PM
theres a guy that sells coilovers and theres a how to in the how to section by molson

rustyballs_69
08-04-2007, 11:39 PM
What motor you got?

Steven01
08-04-2007, 11:51 PM
The motor is the 2.4 twin cam.

rustyballs_69
08-04-2007, 11:55 PM
U have better aftermarket parts for your motor then the 3400. Use the search button and look in the 2.4 threads for some help on upgrades for the motor.

jayson_waltz
08-05-2007, 01:09 AM
Clear the corners, tint the tails, maybe put some LED's in. I don't know much to do performance wise tho, i haven't done any yet. And btw, you are the second closest person to me, only about 2 hours away. The only one closer (that is active and i've seen on here) is aleroed04 in East G.F.

AleroGX04
08-05-2007, 01:22 AM
Im in South dakota, bout 5 hours from ya...i know its not as close as 2 hours, but just thought i'd throw it out there

Steven01
08-05-2007, 01:48 AM
HAHA kewl guys. hey aleroGX To clear ur corners did you do it ur self? Oven or heat gun?

AleroGX04
08-05-2007, 01:55 AM
Yes i did it myself, i used a heat gun..only took about 2 hours for both headlights. Just make sure you be careful with silver piece inside..it is very breakable..and use plenty of silicon putting the light assembly back together.

adam337
08-05-2007, 02:34 AM
i live in wishek nd 4and a half hours from langdon

Satsuriku
08-05-2007, 02:57 AM
http://www.aleromod.com/forums/showthread.php?t=10

theres the how to to clear the corners

removing the molding on the doors is a decent touch as well, but make sure you stop in at canadian tire and pick up some automotive goo gone and use a bucket of hot water and soap and a strong but soft cloth and rub the shit out of it

Steven01
08-05-2007, 10:58 AM
thank you