narrow band a/f??

[rleach01]

looking at buying a narrow band a/f gauge ..first will it work or do i need a wide? and second it says to tap in the the O2 sensor sender wire at the input of the ecu... and what is the wire color for the sender wire.. thanks

[alerored04]

narrow band will work but wont do much except give you a pretty light show. They are not really useful.

[rleach01]

so it wont really tell me if im running lean or rich?

[BlackJack]

yeah, it will tell you rich or lean, but it won't give it to you in real time, nor will it tell you by a readable figure of how much. But like alerored says, it's only function is a pretty light show.

As for the wire that connects to your O2 sensor.......

I dont know which one your instructions tell you to tap into, but here's the wire colors and what pin connection they're in at the PCM:

Connector 1 (Blue):
12 - Tan - HO2S Low Reference sensor 1
28 - Tan/WHT - HO2S Low Signal (Bank 1 Sensor 2)

Connector 2 (clear):
10 - PPL - HO2S High Signal Sensor 1
11 - PPL/WHT - HO2S High Signal (Bank 1 Sensor 2)