pokin' a hole

[RHYYZZ]

any good ideas of where to drill??? I've got the 2.2 ecotech engin??? lil help

[niral622]

I think there's a hole there already, just gotta look for it....if I remember correctly, its above the brake pedal a little ways up so you'll have stick your head into that space upside down :thumbsup:

EDIT:
found two threads...
http://invision.aleromod.com/index.php?sho...874&hl=firewall (http://invision.aleromod.com/index.php?showtopic=2874&hl=firewall)
http://invision.aleromod.com/index.php?sho...152&hl=firewall (http://invision.aleromod.com/index.php?showtopic=2152&hl=firewall)

Good ole search of "firewall" :P

[xwildcard420x]

there is a hole already there its above the brake pedal but a little to the left. you have to pull back the carpet and the plastic piece on the buttom of the dash. and you will see it all you have to do is pop out the firewall bushing and the poke a hole through the rubber in the middle

[Steve03TropicTeal]

i actually duct taped a straightened out hanger rod to my power wire.. and jammed that through and pulled from the other end as hard as i could.. It came through the rubber grommet no problem. No need for drilling.

[cybermob2]

i put all my stuff through this hole. you'd have a tough time getting 4ga wire through it, but both those red wires are 8ga.

might want to put a grommet or silicone in there so u dont get a short tho...as with any thru metal hole. i'm getting lazy on stuff like that.

if you are crafty with a drill, you can drill a hole anywhere in that area... just be careful not to plunge into your engine bay!

http://img27.photobucket.com/albums/v80/cybermob2/hole.jpg

[red99alero04]

Well if that hole is already there couldnt you just widen that hole enough to get more wire through?.

[Steve03TropicTeal]

Originally posted by cybermob2@Apr 22 2004, 03:12 PM

http://img27.photobucket.com/albums/v80/cybermob2/hole.jpg
I used that gray thing. I put a whole through that basically. i fir a 4 AWG through that.