exhaust 3.4

[irondiezl3]

i see people all over doing a search about having an exhaust. i dont get it i dont see an exhaust anywhere for my 04 alero 3.4. i cant find to many mods in general. id love an aftermarket exhaust. where can it be purchased?

[jackal2000]

at your local exhaust shop.

[YALEROYNOT]

pacesetter dual kit (88-1474) is listed for the 4 cyl alero but it is the same for both engines

http://www.pacesetterexhaust.com/monza.php

http://www.pacesetterexhaust.com/images/88-14741.jpg
or a borla ss system

borla system (http://www.bizrate.com/automotiveperformance/oid672972893__nwylf--.html)

http://image.bizrate.com/resize?sq=160&uid=672972893&mid=138864

[irondiezl3]

those will work? gain 5 hp doing so?

[YALEROYNOT]

i have the pacesetter kit in my bed room waiting to go on my car. I don't know the gains I not going to dyno my car before and after.

the borla kit is for a grand am so it will fit as well. that kit is SS so that is why it cost $800. I got my kit for $240 shipped

use the search button there has been a lot of talk on here of exhaust. and try to keep you questions combined to one thread

[99oldsalerogls]

i have the pacesetter kit in my bed room waiting to go on my car. I don't know the gains I not going to dyno my car before and after.

the borla kit is for a grand am so it will fit as well. that kit is SS so that is why it cost $800. I got my kit for $240 shipped

use the search button there has been a lot of talk on here of exhaust. and try to keep you questions combined to one thread
where from? i cant seem to find the pacesetter dual kit

[YALEROYNOT]

where from? i cant seem to find the pacesetter dual kit

this is where i got mine http://www.performancecenter.com (http://www.performancecenter.com/product/Exhaust+%26+Headers/Exhaust+Systems/0/4/0/OLDSMOBILE/2000/Alero/2.4L?brandname=PACESETTER)

I got it on sale a few weeks ago for $240 shipped. the picture shows a single but the part 88-1474 is the dual kit

http://www.pacesetterexhaust.com/images/88-14741.jpg

got to www.pacesetterexhaust.com (http://www.pacesetterexhaust.com/monza.php) and scroll down you will see that 88-1474 is the alero kit

[YALEROYNOT]

exhaust when on yesterday. went smoth till I found out the parts store gave me the wrong o2 sensor :rolleyes2: . I went to car quest and used my buddys account and got the right one ($65). the exhaust and the cat sit great. I also found some places say that the pacesetter kit is 2.25 " when the whole kit is 2.5" except to the tail pipes. the car sounds good no and there a noticeable improvements to hte acelerition in now pulls petty go from 50 mph and up also feels stronger off the line. for the price of this kit ( mine costed $240) I dont think you can beat it

[AJules]

the whole kit is 2.5" except to the tail pipes.

wait, so you're sure all the piping is 2.5 inch except for....
the dual muffler outs?

[Satsuriku]

i always thought the pacesetter only came in 2.5", never heard of a 2.25" pacesetter exhuast

[Kilroy]

pacesetter dual kit (88-1474) is listed for the 4 cyl alero but it is the same for both engines

http://www.pacesetterexhaust.com/monza.php

http://www.pacesetterexhaust.com/images/88-14741.jpg
or a borla ss system

borla system (http://www.bizrate.com/automotiveperformance/oid672972893__nwylf--.html)

http://image.bizrate.com/resize?sq=160&uid=672972893&mid=138864

Dumb question. I got a 3.4 V6, and it has a single outlet on the left, with the appropriatte cutout in the rear bumper. If I got an exhaust system like this, with dual outlets, how would I get it to fit right? Would I just simply cut out a section on the right side of the bumper??

[YALEROYNOT]

Dumb question. I got a 3.4 V6, and it has a single outlet on the left, with the appropriatte cutout in the rear bumper. If I got an exhaust system like this, with dual outlets, how would I get it to fit right? Would I just simply cut out a section on the right side of the bumper??

yes I cut mine a little and used a heat gun and warmed up the bumper and pushed it up.

[YALEROYNOT]

wait, so you're sure all the piping is 2.5 inch except for....
the dual muffler outs?

i always thought the pacesetter only came in 2.5", never heard of a 2.25" pacesetter exhuast


the whole thing is 2.5 except for the two outlets on the muffler. I thought it was 2.25 I read that some were but I don't know were.

[YALEROYNOT]

tuck the exshaust as far up as possiable this is my car with the stock exhaust hangin low. pulling out of my driveway :lol: :rolleyes2:

http://i200.photobucket.com/albums/hh198/YALEROYNOT/02250816481.jpg

[Redog]

Had my cutout done right

Went to the bodyshop and they took a cutout from another GM car's scrap bumper, cut, and molded it into mine and repainted the entire bumper.

I have pics of the finished project in my cardomain. Take a look, It looks stock.

People always say to me "I didn't know the Alero came with dual exhaust" ;)