PDA

View Full Version : changing 6x9s issue


Aler01
07-16-2008, 03:34 PM
Hi,im new and i have a few questions regarding replacing the 6x9s in the rear deck. i've searched other threads and havent found an answer.
recently, i took out my blown 6x9s and disconnected them from the monsoon amp. I intended to install the Infinity Kappas 2-way speakers, but they wouldnt fit,without some cutting/modification of the rear deck.
Does anyone know of some aftermarket speakers that do not require cutting of the rear deck to install? any suggestions from previous experiences with changing the rear 6x9s?

btw. I have a 2001 GLS with the factory upgraded audio system, stock head unit is in place and monsoon amp is in the trunk.

02AleroEco
07-16-2008, 03:57 PM
if you use the stock spacers, from the factory 6x9s the new speakers should fit without a problem, and then obv its just a matter of wiring them back up

kniedelm9490
07-16-2008, 05:06 PM
ya just unclip the 6x9s from the plastic piece

AJules
07-17-2008, 12:29 AM
yeah, I have pioneer 6x9s, and they fit right where the old ones came out

Cliff8928
07-17-2008, 12:55 AM
I had to bend the edges down a bit to fit my Infinity 693.7i speakers in there.

AJules
07-17-2008, 01:11 AM
I had to bend the edges down a bit to fit my Infinity 693.7i speakers in there.

same with pioneer

Redog
07-17-2008, 03:43 AM
^^ I only had to do that in the front with the Pioneers :wacko:

Rears just dropped into place, no prob ;)

AJules
07-17-2008, 01:20 PM
^^ I only had to do that in the front with the Pioneers :wacko:

Rears just dropped into place, no prob ;)

hm, that's weird,

with mine, my fronts were no problem

02AleroEco
07-17-2008, 03:03 PM
lol.. i had that same prob when i got my new speakers.. but i accidently threw my spacers away. so my speakers were justkinda sitting there.. until i blew one, so i got new Alpines. and used the grills from the other 6x9s to make spacers. lol, and no problems yet

Midgear
07-17-2008, 08:53 PM
I had hell getting my pioneer 6x9's in the rear.. that wierd looking plastic frame lookin thing didnt wanna accept the new speakers.. so I pretty much used brute force.. smashed em in place and stuck it back in the 6x9 hole.. so far so good!

Ryan from Ohio
07-17-2008, 09:15 PM
Sometimes you need to dremel. Sometimes you dont.

Sounds like one of the time you do!

Aler01
07-19-2008, 04:57 PM
thanks for the help. in the end i just sold them to someone interested in buying them off me.
Redog, whats pioneers are you using for the rear?

biggyal66
08-25-2008, 04:37 PM
I just replaced my busted factory 6x9's with 180 watt or so Sony Xplodes. I wired everything up and they sound alright but no really big thump. Do I buy new speakers or is the Monsoon Amp not hooked up or what?

meadus101
08-25-2008, 04:43 PM
If you use an Aftermarket deck, You're going to want to replace the wiring.

biggyal66
08-25-2008, 04:55 PM
My 01 has the orginal deck still in it. I just replaced the speakers thats it and the wierd thing is that Someone switched the wiring to where the right wiring is on the left and so fourth. Is that common?

darksobsession
09-05-2008, 04:08 AM
i am having the same problem. whoever did the previous install of kickers managed to get them in properly. when my new infinitys wouldn't fit, i compared them to the kickers and they both wouldn't fit - were too big. so how the heck did the kickers get in there properly?

see my other post.

thnx! >:O