how to make this

[irondiezl3]

how can u. has anyone tried? i worked at valvoline and with the 3 part fuel cleaning. he had a tube with some kind of valve that connected right on the can of cleaner and the other end had a special fitting that fit into the vaccuum line. id love to do this with seafoam but i dont know where to get those two fittings anyone ever make their own or know where to get them?

make the fitting the two ends one that goes into the vaccuum line and the other end the top that goes on the can of cleaner

[cherrington17]

how to make what??

if you thought you had a picture in there of something, your wrong.

[Naich]

I think you might need to preface what you're asking with an explaination of what you're trying to do. The post makes no sense.

[irondiezl3]

lol yea unless u se it its hard to understand picture a can of seafoam or any prefered cleaner. now instead of just taking a vaccuum line to the seafoam can we had a contraption it was some kind of regulator that had a hose connescted to it the regulator screwed onto the cleaner example the can of seafoam now that had a plastic tube that you connect to ur vaccuum line. the end of the tube had a little cone shapped gromet that went into the vaccuum line. the purpose of this is so its regulated and the car rpms dont go insane while cleaning also it created a slow drip cleaning longer and more evenly just like a iv line in the hospital. hope that helps.

[cherrington17]

your not suppose to have cleaner running through your engine at all times... your just gonna burn it off. your suppose to flood your engine w/ it, let it sit so it soaks in, THEN burn it off and take the carbon with it.

Your engine is in no way comparable to your body. :lol:

[irondiezl3]

its not forever its until the can is empty

[cherrington17]

you can just use the PCV line as the vacuum line to drain the bottle... it fits in there like a glove...


:huh:

[irondiezl3]

cant car stalls as soon as u put it in there

[cherrington17]

its going to rev real hard... you give it some throttle and let it almost stall. it'll choke and stutter, but its suppose to. your flooding your engine w/ something that isn't fuel.

[meadus101]

I want a Diagram of the 2.4 that shows me exactly where the Hose is, and the best part to throttle it by, Since I don't trust myself to poke things with my finger with the engine running.

[CactusWill]

cant car stalls as soon as u put it in there

Thats part of the instructions on a can of sea foam :huh:


Put 1/3 into intake until stall, 1/3 into oil, 1/3 into gas tank.



Not saying any of this is good, bad, or whether it actually works or not. Thats just what the instructions say.