AAS skirts

[bizarre179]

Ok, so i have had my kit on my car for a while and soon enough i am gonna be molding my skirts. Anyways, I went to go look at it, and i believe that the 2-dr rockers are a little bit different than the 4-dr. Mine look like there is more of an angle at the end of the rocker than on a 4 door, therefore the skirt is also a different angle.

Should i go buy stock rockers from a 4 door, or should i just try to work around it. I have never done skirts before, so i am gonna have my friend help me out, and he said buy the 4 door rockers.

Input anyone?

[natedawg9640]

they should be the exact same.

[bizarre179]

I will have to post some pictures... but they look different. It also could be the kit itself. It "looks" like it should fit on the 4 door perfect, but it doesnt on mine.

For clarification, it is not an aas kit. It is an ebay kit. (Which could be another reason)

[DansGen1Alero]

the original sides when they first came out, the one was longer then the other, you could actually fit the one inside the other. They were suppose to fix that, Is that the problem you have?

[shiny alero]

i sold him this kit...both side's fit over top of the stock rockers

[Gr1m]

i heard with the AAS kit that your supposed to put the skirts over the stockers, although on mine i never did that, i just cut the AAS skirts and re-FGed them to size and bolted them on from underneath. also, do you know what ashesive your using to mold them? you do know with body roll and movement molding fiberglass to metal can cause the paint to crack if not done properly

[bizarre179]

Its just the curve on the top edge toward the back. The overall lenth of it is not a problem, its just the curve. If i fit it over my stock rocker, there is a gap where you can see the stock under the aas skirt.

Grim, what do you suggest i use as an an adhesive?

[[ion] C2]

hm mine would definitely NOT fit over the stock rockers whatsoever