PDA

View Full Version : Stainless Steel Bezel

xstrong4lifex
03-19-2009, 04:39 PM
Installed and now here's some pix.

http://i42.tinypic.com/2816eio.jpg

http://i42.tinypic.com/14np5vr.jpg

http://i40.tinypic.com/14cgsqe.jpg

http://i43.tinypic.com/2i0soz6.jpg
hok666
03-19-2009, 05:53 PM
damm! I have the aluminum one I think Im gunna switch to stainless steel:)
AlbinoMonkeyRat
03-19-2009, 05:54 PM
not my style, but you did a good job. :)
Valley olds
03-19-2009, 06:07 PM
Nice install!
leoalero
03-19-2009, 06:26 PM
okay now you gotta say how you installed it ,i still have this in a box somewhere cause i was too scared to break something!
Misuseofyou
03-19-2009, 06:37 PM
Never done it myself, but you have to remove the plastic face, cut the clear part off the black backing and its a done deal.
AlbinoMonkeyRat
03-19-2009, 06:40 PM
I'm fairly sure there's already a how-to on it....but it's too easy. You just gotta have a steady hand, a dremel tool with the cutting bit, and silicone glue (clear!). if you have common sense, you can figure it out.
xstrong4lifex
03-19-2009, 07:38 PM
I did not do it that way, I cut out a shit load of the back then slid it in their then it was good to go.
Caboose73
03-19-2009, 07:51 PM
not my style, but you did a good job. :)

xxxx2
jayson_waltz
03-19-2009, 07:55 PM
nice job installing, but i don't rly like the look with the black faces still. it would look good with whate facees tho.
heineck
03-19-2009, 07:58 PM
looks clean
jeenysrider07
03-21-2009, 10:24 AM
now on speedhut i says that bezel is for a 97 - 02 alero, so would it fit in my alero, mine is a 03, they look exactly the same
jeenysrider07
03-21-2009, 10:29 AM
also where can u find halo gauges for a 03 alero, all I can find is for up to a 02 alero, or would that work
01OldsAleroGt
03-21-2009, 10:37 AM
o.O whats all this talk bout cutting and shit... i easily got my gauge cluster out and apart within 10 minutes..... it was EASY XD
xstrong4lifex
03-21-2009, 10:38 AM
jeenysrider07 they work for any Alero.
Alero_1986
03-21-2009, 11:35 AM
not my style, but you did a good job. :)

x3

I think they would look better if there was any way for the bezel to outline the entire cluster.

Also white face gauges would be a good supporting mod.
black00gt1
03-21-2009, 11:43 AM
i got one on the grand am i vinaled it blue :)

http://i42.photobucket.com/albums/e322/1badgto/DSCF0070-1.jpg

never saw it b4 i got a spare one from my 99 ga i was thinking of using the c/f vinal see how that turns out
leoalero
03-21-2009, 12:11 PM
o.O whats all this talk bout cutting and shit... i easily got my gauge cluster out and apart within 10 minutes..... it was EASY XD

man insdtalling glow gauges and installing alum.bezel is not the same work at all,its at a different place!
Valley olds
03-21-2009, 12:55 PM
IMO the black gauge faces is good enough. There is really nothing white inside the car that will make white face gauges flow well with the rest of the interior. What Im planning on doing, is leaving black faces, but getting green led's for the gauge cluster and getting red intelliglow needles. But yeah, I dont think the white faces would flow with the rest of the interior or the ss bezel. Maybe if he had the CF bezel itd flow better.
xstrong4lifex
03-21-2009, 01:11 PM
IMO the black gauge faces is good enough. There is really nothing white inside the car that will make white face gauges flow well with the rest of the interior. What Im planning on doing, is leaving black faces, but getting green led's for the gauge cluster and getting red intelliglow needles. But yeah, I dont think the white faces would flow with the rest of the interior or the ss bezel. Maybe if he had the CF bezel itd flow better.


Agree.