Milzy's "race car"

[kwhauck]

So the milzy "race car" ran a 12.3 at 110mph on 10lbs of boost and a stock motor........i'm waiting to see some video....

http://www.grandamgt.com/forum/showthread.php?p=1088916&posted=1#post1088916

[jackal2000]

damn.

[Redog]

When the video's posted, I'll believe it.

Not even slips posted :No:

[Caboose73]

http://www.milzymotorsports.com/images/pNationals09/GARC_12317pass_8-9-09.JPG

post 454 about half way down the page

[AleroDrime]

please let us know when/if a vid surfaces

[Afugy]

Thats only a little over an hours drive for me, next time he runs I want to know!

[lvemy3100]

meh... the car isnt even remotely close to stock...

as milzy stated int he thread

"Garrett T67 ball bearing turbo
custom 1 3/4" primary turbo headers
3" downpipe
1000+hp fuel system (A1000, 95lb/hr injectors, etc)
no accessories other than alt (electric water pump)
4t65eHD transmission with 3.29 gears and 4000 stall converter
26x11.5x16" MT ET Streets, 28x4.5x15" Moroso DS2 fronts, each on Weld Draglites
custom coilovers
custom tubular rear suspension
6-point roll cage with halo and A-pillar bars,
gutted interior
1 racing seat"

also from the looks of it he also has lexan in place of almost all the glass and wheelie bars out back...

based on the info provided it pretty much cant be driven on the street...

I would be impressed if he ran the 12 in a car that could be driven on the street like spy.. and spy is running in vegas heat to boot

right now the time he posted up is actually very unimpressive to me for what all he has done

[[ion] C2]

No one said the car was close to stock; the long block is.

[Caboose73]

like ion said stock bottom end and i dont think theres any major head work done either

[lvemy3100]

C2;485973']No one said the car was close to stock; the long block is.


my point was that I would have expected better considering what all he did... and what spy and others have already proven can be done without making the car undrivable on the street

I dont think anyone on this board would be willing to go to such lengths to pull off a 12 sec pass and not be able to drive the car home especially when you really dont have to spend near as much time or money to actually do so

[Ryan from Ohio]

Havent been to Norwalk in ages...

Lets go racing... lol

Stock Aleros drag racing... lol a site to behold- and laugh at.

[[ion] C2]

my point was that I would have expected better considering what all he did... and what spy and others have already proven can be done without making the car undrivable on the street
true

spyhunter's run was done before he made 432whp too.. that was when he was only on a little over 300 if I recall correctly

I dont think anyone on this board would be willing to go to such lengths to pull off a 12 sec pass and not be able to drive the car home especially when you really dont have to spend near as much time or money to actually do so
Agreed.

[AleroDrime]

what times are aleros posting with NOS or is noone spraying at all?

[Redog]

what times are aleros posting with NOS or is noone spraying at all?


My Alero>My Reputation If I have a ?, I will Search and Ask. If it's not anserwed, I will make a thread. (No matter how silly my ? is to a Genius like you)

The combination of the two says a lot :No:

[Bad99Olds]

The combination of the two says a lot :No:

hahahaha. qft

[BlackJack]

regardless of the mods done to his car, I'm hearing lots of shit-talking from people who haven't made it into the 12's yet.

True enough though, if my Alero were stripped down that far and modified to that point, it should make it into the 11's easily.

Mark my words, I will make it into the low 12's without stripping it down.

[Redog]

regardless of the mods done to his car, I'm hearing lots of shit-talking from people who haven't made it into the 12's yet.



Not talking shit just looking at the past

[AleroB888]

http://www.youtube.com/watch?v=xvHyjq512dE&eurl=http%3A%2F%2Fwww%2Egrandamgt%2Ecom%2Fforum%2F showthread%2Ephp%3Ft%3D80539&feature=player_embedded

[BlackJack]

bah, sorry Ken. I just got out of a volley of sheer stupidity with one of the retards on GAGT.com right before I made that comment.

I'll be honest, there are more heavily modified GA's than Aleros, ergo by "law of averages" we have less retards here per capita. You guys just drive on doing what you're doing, and I'll just sit back and shut my yap for a change.

[Bad99Olds]

bah, sorry Ken. I just got out of a volley of sheer stupidity with one of the retards on GAGT.com right before I made that comment.

I'll be honest, there are more heavily modified GA's than Aleros, ergo by "law of averages" we have less retards here per capita. You guys just drive on doing what you're doing, and I'll just sit back and shut my yap for a change.

I saw that thread over on gagt actually Mike, and those toolbox's were make a valiant effort to tear into you. Although in the end, you made them look like the mo-rons that they were. Well done.

[[ion] C2]

Man that video of the run makes look like he's absolutely crawling. Weird. I almost thought it was an 1/8 mile run. :lol:

[AleroB888]

C2;486450']Man that video of the run makes look like he's absolutely crawling. Weird. I almost thought it was an 1/8 mile run. :lol:

Yeah, Magnuson uses that same camera angle a lot, too.......:)

http://i493.photobucket.com/albums/rr299/Gflash01/MilzyRaceCar-1.jpg?t=1250101754

http://i493.photobucket.com/albums/rr299/Gflash01/MilzyRaceCar-2.jpg?t=1250102457

[BigStribS]

Its was also his first time running the car! And the block, heads, and cam are all stock. Why break it the first time out exspecially when your not used to it yet?

Atleast we know what the stock 3400 can hold right now!

[spyhunter]

C2;485996']true

spyhunter's run was done before he made 432whp too.. that was when he was only on a little over 300 if I recall correctly


Agreed.

I did it on a peg leg too.

Slicks help a lot when you're actually making a lil power.

[kwhauck]

Its was also his first time running the car! And the block, heads, and cam are all stock. Why break it the first time out exspecially when your not used to it yet?

Atleast we know what the stock 3400 can hold right now!

we knew what the 3400 could hold before.......

[WhiteV6]

He would have to dyno it to tell us anything about the motor. A purpose built car won't need as much power to run those times. He left a lot on the table with this setup but it will make whatever else he does look even better once he dials in it and gets used to the car. I look foward to the results.

[spyhunter]

After watching the video again and again with something not rubbing me right. I've come to a conclusion. His wheelie bars are touching the ground. While the car is at rest, and while the car is moving. That setup wouldn't be legal in sanctioned events I'm assuming, even in FWD events if this is true that wheelie bar wheel IS touching the ground. While the car is still it has to be free-spinning. From everything I have ever known. hmmmmmmmmmmmmmmmmmmmmmmmmmmm

[BigStribS]

3:6 WHEELIE BARS
All wheelie bars, regardless of class, must have non-metallic
wheels (i.e., rubber, plastic). Wheelie-bar wheels must turn freely
at starting line; any preload prohibited. Wheelie bars must be fixed.
Hydraulics, pneumatics, electronics, etc. or any adjustment or
movement during run prohibited. Using wheelie-bar wheels as “fifth
wheel” sensing device prohibited.

[BigStribS]

Im pretty sure that they weren't touching but your right...

[spyhunter]

Im pretty sure that they weren't touching but your right...

the video to me shows them touching. Either way, they seem to be faaaaaaaaaaaar too close to the ground and actually seem to be supporting some of the weight of the rear.

[3500Alero]

looks like the v6 n-bodys are starting to catch up to the v6 j-bodys!

this is the fastest 3400 powered Cavalier right now
http://www.youtube.com/watch?v=xnjfjCTDpZo

that vid was last year on Hot Rod's dragweek with a slipping clutch. This year his best was 11.94@119mph bone stock 3400 +13psi full interior and drag radials

little more info here >http://www.v6z24.com/jbodyforum/getting-ready-for-dragweek-2009-t109693.html

[Ian 2000GL LA1]

i think they were touching the ground as well.

[Redog]

the video to me shows them touching. Either way, they seem to be faaaaaaaaaaaar too close to the ground and actually seem to be supporting some of the weight of the rear.

Good call, man!! I see that now too. I didn't notice that before.

I didn't know the wheelie bar rules anyway. I haven't come to that part of drag racing......yet :p

[xXManwhoreXx]

meh... the car isnt even remotely close to stock...

as milzy stated int he thread

"Garrett T67 ball bearing turbo
custom 1 3/4" primary turbo headers
3" downpipe
1000+hp fuel system (A1000, 95lb/hr injectors, etc)
no accessories other than alt (electric water pump)
4t65eHD transmission with 3.29 gears and 4000 stall converter
26x11.5x16" MT ET Streets, 28x4.5x15" Moroso DS2 fronts, each on Weld Draglites
custom coilovers
custom tubular rear suspension
6-point roll cage with halo and A-pillar bars,
gutted interior
1 racing seat"



Holy Crap If I ran that much in my Honda I would run 10's.... Aleros really do somewhat suck hahahha

[Ttop191]

/\/\ ricer please... :lol:

[BlackJack]

Its was also his first time running the car! And the block, heads, and cam are all stock. Why break it the first time out exspecially when your not used to it yet?

Atleast we know what the stock 3400 can hold right now!
bah I ran 15 and 18 psi with no breakage before. it was drastic altitude change that caused me to pop a slug.

[[ion] C2]

That eBay turbo could produce that much pressure without blowing to bits? I'd get your hands on a Garrett soon if you plan on keeping the engine.

[jayson_waltz]

Holy Crap If I ran that much in my Honda I would run 10's.... Aleros really do somewhat suck hahahha
seriously wtf, thats the second n-body bashing post tonight (that i've seen). gtfo ricer.

[wrestlingandrunning]

Holy Crap If I ran that much in my Honda I would run 10's.... Aleros really do somewhat suck hahahha

Do you not realize that the Alero and Grand Am is the same thing.
Though if we have a ricer section can he be the mod for it?

[kwhauck]

seriously wtf, thats the second n-body bashing post tonight (that i've seen). gtfo ricer.

and he received an infraction for one, and a warning for the second one stating that if he trys to start problems again with his honda loving he is getting a ban.....

[Bad99Olds]

and he received an infraction for one, and a warning for the second one stating that if he trys to start problems again with his honda loving he is getting a ban.....

Kyle, you are my new favorite admin :)

[jayson_waltz]

^x2, good response to this

[kwhauck]

Kyle, you are my new favorite admin :)

what? i thought i was always your favorite, cupcake!!

[Bad99Olds]

what? i thought i was always your favorite, cupcake!!

Well i had to see how you handled your transition from average schmuck to part owner/admin. I like it. That said, you gotta keep me out of trouble with the big dogs :) haha.

[BlackJack]

C2;504589']That eBay turbo could produce that much pressure without blowing to bits? I'd get your hands on a Garrett soon if you plan on keeping the engine.
yeah, isn't that wild? Lets see how long it lasts.