PDA

View Full Version : She felt good...now she wants to hit the highway.

DOHC_tuner
09-17-2009, 01:31 PM
She's crying for a tune now running excessively lean.

ON WITH THE PICS!:yahoo:

THE ENGINE BAY IS A BIT DIRTY BUT THAT WILL BE TAKEN CARE OF WITH SOME PAINT.

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040586.jpg

I WILL BE TUCKING THE WIRES THIS IS JUST FOR A TEST RUN.

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040587.jpg

CRAPPY NEW FABRIC NOT INTENDED FOR INTERIOR
DRIVER SIDE ORIGINAL FABRIC WAS DECENT.

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040585.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040592.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040589.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040593.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040594.jpg

A STOCK LG0 FOR MY GTZ BERETTA....

I PLAN TO BUILD IT UP TO W41 SPECS INCLUDING A LSD FOR THE TRANNY.
ALSO REMOVING THE TIMING CHAIN AND INSTALLING A TIMING BELT!;)

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040597.jpg
natedawg9640
09-17-2009, 01:34 PM
hmmm... door panels look like my ball sack.
rida125
09-17-2009, 01:34 PM
Is there three different colors of carpet in there or is that just the camera?
[ion] C2
09-17-2009, 01:38 PM
hmmm... door panels look like my ball sack.
this

should've had KenshinZero do those lol, he wrapped his dash and it came out super smooth

engine looks good
natedawg9640
09-17-2009, 01:41 PM
it look sas though you laid the fabric over it... then just put all the hardwere back on and let it fall as it may.... did you forget to glue it? did you forget to stretch it? you forgot to do something... center console too... why would you do that to your interior? don't take this as a personal attack, but that is a terrible abortion of interior modification.
Th0r
09-17-2009, 01:46 PM
Looks to me like he's just test fitting to see if he likes it.
cherrington17
09-17-2009, 01:50 PM
interior = monkey ass.

the rest = good stuff.


fix the first, and get back to us.
_01Alero_
09-17-2009, 01:52 PM
I see what you were going for, but yea interior should probably undo those door panels... But the rest is very nice....
DOHC_tuner
09-17-2009, 02:27 PM
it look sas though you laid the fabric over it... then just put all the hardwere back on and let it fall as it may.... did you forget to glue it? did you forget to stretch it? you forgot to do something... center console too... why would you do that to your interior? don't take this as a personal attack, but that is a terrible abortion of interior modification.

I did stretch it but it the material was too thing so it did not go over well on the pass side arm rest. The fabric store discontinued the fabric I used for the driver side (I ORDERED SOME MORE BUT THEY DISCONTINUED IT). So I used some similar suede but it was too thin....I did not want to redo the driver side to match so I will leave the driver side alone.

Center console came out really good, yet it it did fade a bit. I have some extra touches for the center console awaiting.


Is there three different colors of carpet in there or is that just the camera?

The "Carpet" is black. I used black suede for the door panels and a blueish fabric for the center console.

C2;495460']this

should've had KenshinZero do those lol, he wrapped his dash and it came out super smooth

engine looks good

Thanks, I still have yet to add a few more touches for the appearance of the engine bay. I can't wait to tune!
natedawg9640
09-17-2009, 02:32 PM
did you glue it with spray adhesive?
CactusWill
09-17-2009, 07:32 PM
Why a timing belt instead of a chain?
Redog
09-17-2009, 08:23 PM
Like the engine and the carpet around the base of the center consloe.


Not liking the doors.
Nate's Alero
09-17-2009, 08:27 PM
Why a timing belt instead of a chain?

What i was wondering
[ion] C2
09-17-2009, 08:37 PM
For more JDM appeal
DOHC_tuner
09-17-2009, 09:17 PM
Well for those who understand how an engine works will acknowledge the concept behind removing excessive weight from the rotating mass.

Most popular is the balance shaft delete or neutral balance shafts. Along with lighter Eagle rods, lightweight crank/alternator pulley, etc.

Here is an insight of what the early LG0 consist of. "DOUBLE ROW Chain". A lot on the heavy side so I can either swap for the single row to loose some weight or install Ron's Timing Belt swap kit for the Quad 4 (LG0 and W41 engines only)...will not work on the LD9.

This is the best option to free up horsepower and make the Quad 4 scream beyond the well known redline.

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040600.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040603.jpg

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040606.jpg

I sold the H.O. Cams including lifters for a good deal.

http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040610.jpg
http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040613.jpg

Just the begining of breaking down the LG0....hope to see her future.
http://i275.photobucket.com/albums/jj313/DOHC_tuner/P1040615.jpg
bkathsalero
09-17-2009, 09:56 PM
Damn!! you 4 banger guys have alot of room in your engine bays!! could fit a couple dead bodys in there.