Tip Help

[sfi3400]

i bought the super 44's 2.5in opp inlet 2.5in center outlet. and 2,5inch tip wasn't thinking when i got home. The tips are supposed to slide over the muffler outlet correct? well on summit.com the next size up from 2.5inch is 2.750 inch is that to big to weld on?

[Spike440]

they have adapters at most hardware stores to go from one size inlet to the next, and can be attached by exhaust clamps. Thats how I have always fixed exhaust leaks in all my other cars just by cutting about 2-3 inches of the pipe off wherever the hole is and putting in an adapter with exhaust clamps.

[sfi3400]

thanks, well natey just told me that they would grind/sand down the muffler outlet hole to make smaller so the tip can fit snug over it and then weld. because a quarter inch is big i think

[Kilroy]

You can get tube expanders, AND "make smallers". Might be an idea??

[sfi3400]

ok, the shop said something about bumping up? but my tip is 12inch long is that to BIG or should i og got 10 inch becauce the 8inch is like under the car and i want them to be either right at end of bumper or about not more then 2 inches past bumper.

[99alerogirl]

but my tip is 12inch long is that to BIG

if your tip is 12 inches long then yes, it is way too big...





i'm sorry i had to

[sfi3400]

ok so would 10 or 8 be better?

[HazMatt24]

if your tip is 12 inches long then yes, it is way too big...





i'm sorry i had to

internet rumors suggest you are lying

[sfi3400]

im lost so are you saying that 12inch is to big for a tip or not to big????

[HazMatt24]

im lost so are you saying that 12inch is to big for a tip or not to big????

she was making a cock joke

[Vella's Alero]

im lost so are you saying that 12inch is to big for a tip or not to big????

Someone clean the wall behind him cause that flew right over his head...lol

[99alerogirl]

haha i'm sorry

[Cliff8928]

i bought the super 44's 2.5in opp inlet 2.5in center outlet. and 2,5inch tip wasn't thinking when i got home. The tips are supposed to slide over the muffler outlet correct? well on summit.com the next size up from 2.5inch is 2.750 inch is that to big to weld on?

The muffler is 2.5" ID as is your tip. You either need to expand one side, or use a small piece of pipe to connect them together.

[Redog]

Do this in this order


Get muffler installed
use a tape measure
figure out where you want the tip to be
write measurement down
get money
go to store
pick out a tip
go back to exhaust shop
get it installed
drive car homeOr the other way you could go is

get muffler installed
ask shop what kind of tips they have
make a deal
get them put on right there

[Redog]

if your tip is 12 inches long then yes, it is way too big...





i'm sorry i had to

Yeah I hope it didn't hurt too much babe

Still having probelms walking? :scpimp: