View Full Version : Cashdollar2009 Build Log
Cashdollar2009
06-13-2010, 10:15 AM
Well here is the first picture of hopefully a few to come. I am re-doing my subwoofer setup here in the next week for a competition next saturday. The box will be built for daily, but I would still like to see how it does on the meter.
Box Specs: 3.8ft^3 @33.8hz.....ish, you can see my torres calculations.
15" DC Audio Level 4xl (epoxy joints, extra spider, level 5 coils/soft parts)
2) runs of 2/0 to the rear.
2) Deka 9a31 Group 31 Batteries in the rear.
Big Three in 2/0.
Crescendo 3kwp @ 1-ohm. ;)
Cutting the wood today, the build for the most part will be this wednesday. :) Stay tuned!
Torres Calc:
MattismodderX
06-13-2010, 10:25 AM
:popcorn: cant wait to see it!
Afugy
06-13-2010, 10:30 AM
WOW thats tuned really low for a box that you can't fire backwards. That box is going to be thin for MDF and 3k on 15"s, or are you using birch, or planning to glass the inside.
Are you going to have that done in time for the show on the 26th?
Cashdollar2009
06-13-2010, 04:15 PM
Box is being fired into the cabin, i'm sealing it off. I'm using 3/4" oak dial rods for bracing. And it will be done this weekend for a competition at Pittsburgh Parts-a-Rama at the Butler Fairgrounds. I got a few buddies i'm meeting down there. :)
And *cough, one 15". :)
AleroB888
06-13-2010, 06:32 PM
"If you build it, they will come." :p
Ryan from Ohio
06-13-2010, 06:46 PM
"If you build it, they will come." :p
And she will again, again, again and yet again...
Cashdollar2009
06-15-2010, 02:36 PM
Last video with old box. New box build starts tomorrow. :) Cell phone video ftl.
http://i389.photobucket.com/albums/oo331/Terrortodadeer/th_0615001231.jpg (http://s389.photobucket.com/albums/oo331/Terrortodadeer/?action=view¤t=0615001231.mp4)
Cashdollar2009
06-15-2010, 02:45 PM
Oh, and my 2/0 came in today from weldingsupply. Impressed with the flexibility of the cable. Great buy, would recommend them to anyone! :thumb:
JLw7123
06-15-2010, 02:51 PM
damn how much did it cost you
Ryan from Ohio
06-15-2010, 02:56 PM
The 2/0 is equivalent to many manufacturers 1/0 in car audio world.
Cashdollar2009
06-15-2010, 03:02 PM
The 2/0 is equivalent to many manufacturers 1/0 in car audio world.
And many manufacturers in the car audio world's 1/0 is equivalent to 2ga. Instead of going with Knu or Fosgate or any of the higher end companies that are known to sell true 1/0 I just chose to save out about $150.00 and bought 2/0 welding cable expecting to have two runs in the ballpark of "fat 1/0." I'm satisfied. $140.00 shipped for 50ft does the trick for me. It's flexible, and i'd recommend them to anyone in a heartbeat.
Ryan from Ohio
06-15-2010, 09:50 PM
You gotta be careful where you buy wire.
The only thing you will notice with the wire you bought is the sheathing is thinner. Big deal, right?
Cashdollar2009
06-15-2010, 11:04 PM
You gotta be careful where you buy wire.
The only thing you will notice with the wire you bought is the sheathing is thinner. Big deal, right?
Ryan, do you not like me? lol
Anyway, I am aware of the thickness of the jacket. I plan to take that into consideration ESPECIALLY when it comes to passing it through my firewall. Though, I am happy with how flexible it is, as it kicks my old Knukoncepts Aluminum and Copper clad's ass. In this case, especially for the price, I feel weldingsupply.com has done me well. :) Two fats runs of copper was included in my supply list, and I gots it. :thumb:
bizzy07
06-16-2010, 12:39 AM
Good choice of equipment. I am thinking of going from my 12" hdc3-A's to some DC xl 12's.
Ryan from Ohio
06-16-2010, 06:57 AM
Ryan, do you not like me? lol
Anyway, I am aware of the thickness of the jacket. I plan to take that into consideration ESPECIALLY when it comes to passing it through my firewall. Though, I am happy with how flexible it is, as it kicks my old Knukoncepts Aluminum and Copper clad's ass. In this case, especially for the price, I feel weldingsupply.com has done me well. :) Two fats runs of copper was included in my supply list, and I gots it. :thumb:
Just putting the truth out there so people know where the differences are.
Wire is confusing in Car Audio.
Out 1/0 is equivalent to 2/0 in the real world. People seem to forget this and act all surprised...
Also, theres TONS of wire out there thats crap. Gotta be careful!
Cashdollar2009
06-22-2010, 08:14 PM
Teaser picture! At least until I get them all uploaded along with quick video number one. :)
Cashdollar2009
06-22-2010, 10:15 PM
Some subwoofer porn. :scpimp:
http://www.youtube.com/watch?v=RTLwMS0aoYU
Chris2000
06-22-2010, 10:34 PM
Sounded like someone sharted
MattismodderX
06-23-2010, 09:59 PM
faaaap. looks sweet man. cant wait to hear it
Ryan from Ohio
06-23-2010, 10:33 PM
Dude...
If you continue that your sub will be junk. That was one of the absolute most horrible unloads I have ever seen.
Please send me your box layout so I can have a look. You either designed that bock incorrectly, way below tuned frequency or simply way over the subs capability.
You can clearly see where it went non-linear in a destructive fashion.
A very scary video for a nice sub.
Cliff8928
06-24-2010, 02:09 AM
I was hoping it was just a bad video.
Ryan from Ohio
06-24-2010, 06:44 AM
Actually thats what I heard- camera shutter speed?
If that truly is going that non linear theres a huge issue. If its just the video carry on.
Cashdollar2009
06-24-2010, 11:07 AM
Actually thats what I heard- camera shutter speed?
If that truly is going that non linear theres a huge issue. If its just the video carry on.
The video was taken on my girlfriends droid. Shutter speed ftl. Trust me, it doesn't sound that dirty in person. ;) Good lord it sounds like it's bottoming out in the video? Once I find the damn charger for my good camera i'll get some good vids up. Hopefully i'll have the build pictures up tonight as well.
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.