Subwoofer Alero Abuse

[Cashdollar2009]

http://www.youtube.com/watch?v=dg1N9fL_Hq0

Watch in 480p :p

Camera automatically saves in mp4 format and I don't have the software yet to convert it to edit, so it's one straight cut. Enjoy. :scpimp:

[Chris2000]

Is there any supporting mods that are under the hood or is that park bench there just for "looks"?

I was looking up video's a while back of a guy that had an old setup and when he was recording his rearview mirror I saw the spoiler in the rear. I was gonna post it up about how horrible it sounded, and the funny spoiler. I guess you got it covered :haha: :haha:

[cavaliers60]

You do know your eardrum is doing the exact same thing the car is.... Good way to go deaf. lol I like bass, but Not to the point where my ears bleed. :lol:

oh, also, I've seen better. :p

http://www.youtube.com/watch?v=pSoBfDXYKW4

[datwonguy]

mayne!! i had sum subs in my alero. not as loud but it rattled the shit out my trunk, it warped or something. sounded gross! so i sold them. if only i could fix the rattling i would still be bumpin. sup with that wing tho

[Cashdollar2009]

Is there any supporting mods that are under the hood or is that park bench there just for "looks"?

I was looking up video's a while back of a guy that had an old setup and when he was recording his rearview mirror I saw the spoiler in the rear. I was gonna post it up about how horrible it sounded, and the funny spoiler. I guess you got it covered :haha: :haha:

http://www.youtube.com/watch?v=g5j2FbCQ5O8

First of all, it was my FIRST EVER audio setup I had put in a vehicle, consisting of two old school (circa 1994) subs, and a $34.00 amplifier off of ebay. Cut me some slack! :rolleyes2: I had that amplifier bridged to 2-ohms, with it being 4-ohm stable. Got a 139 on the Term Lab.

As for the wing, the feelings are mutual buddy. Ship me a black lid and i'll paypal you $100.00. I've been checking scrapyards for a year now, and i'm not dropping $150.00 on a bare bone lid. I finally saved up enough money to buy my first car at 17, and I make one bad decision, and I got everyone on my back. :( But I agree. People just hate until I get them inside. ;)

You do know your eardrum is doing the exact same thing the car is.... Good way to go deaf. lol I like bass, but Not to the point where my ears bleed. :lol:

oh, also, I've seen better. :p

http://www.youtube.com/watch?v=pSoBfDXYKW4

And brah, give me another 9,000 watts rms, and a van. I'd be balling my eyes out if some kid in an Alero showed me up with substantially inferior equipment. ;) And hey, I STILL have seen better. :scpimp:

http://www.youtube.com/watch?v=vXLdf0LOuR0&feature=player_embedded#!

http://www.youtube.com/watch?v=b-rpcoTBV3c&playnext_from=TL&videos=ACFFn_YJBnU

Both off of less power and cone area. :p

[cavaliers60]

My question is why? Why do you need so much low frequency? lol That's just askin' to damage stuff. lol

[JLw7123]

damn nice set up

[alerogls001]

Yank the spoiler off and fill it with silly putty.:p

[Mori01]

I'm building a bass CD for my 2 12 inch JL Audio W-3's...What song is that?

[Cashdollar2009]

I'm building a bass CD for my 2 12 inch JL Audio W-3's...What song is that?

Question first, what amplifier, and do you know how to use a subsonic filter? These songs get down. I believe it is track 8 in zip number 13. ;) Good stuff, dude knows what he's doing.

http://www.stevemeadedesigns.com/board/topic/44109-decafs-screweddemo-collection/

[Cashdollar2009]

Yank the spoiler off and fill it with silly putty.:p

And I was thinking old bubble gum so I could blow some bubbles on every bass note. :p

[JLw7123]

I'm building a bass CD for my 2 12 inch JL Audio W-3's...What song is that?
he should have the JL 1000/1 V2 amp

[99alerogirl]

hahaha i don't know about anyone else but i was laughing so hard during that whole video. that was crazy. especially when you focused in on the coins... oh boy i was rollin hahahha. makes me miss my system =(

[MattismodderX]

so now that you have that sexy 3k why not get another 15? *evil scientist laugh

[Cashdollar2009]

so now that you have that sexy 3k why not get another 15? *evil scientist laugh

Don't think I haven't debated that. ;) Now picture this, the video you were watching. That is one coil, off of 1400ish. About a week into ownership the stitching one the one coil's leads ripped, and they were rather frayed and have snapped. I did my best in soldering them in my last box and they still snapped. Before I put it into this new box I did my absolute best with only about 3/4" sticking out from the cone to work with... yup, the readout on my amp is 2.3 ohms and they are 2 ohm voice coils wired to 1-ohm. Therefore, a coil is out. :( But the good news is, I called the owner of DC Audio and he is shipping me a recone FREE of charge because it is covered under their warranty due to the stitching and slapping. Wait til you feel the 3k damage. :)

[Mori01]

he should have the JL 1000/1 V2 amp

Correct, and no I dont know how to use a subsonic filter.

[AleroDrime]

cashdollar, what rattle proofing do you having going on in your trunk

[xsavyor1]

Not bad! If I missed it what did it do on the termlab? Looks to be close to a 140-142 DB.

[Cashdollar2009]

Now picture this, the video you were watching. That is one coil, off of 1400ish. About a week into ownership the stitching one the one coil's leads ripped, and they were rather frayed and have snapped. I did my best in soldering them in my last box and they still snapped. Before I put it into this new box I did my absolute best with only about 3/4" sticking out from the cone to work with... yup, the readout on my amp is 2.3 ohms and they are 2 ohm voice coils wired to 1-ohm. Therefore, a coil is out. :( But the good news is, I called the owner of DC Audio and he is shipping me a recone FREE of charge because it is covered under their warranty due to the stitching and slapping. :)

Not bad! If I missed it what did it do on the termlab? Looks to be close to a 140-142 DB.

Here's the story.^^^^^ I did a 142.0 @ 40hz on one stinking coil. Pun sadly unintended. Plans: have a d1 recone coming. Going to have it wired down to .5 and can't wait to see how 4k treats it. :) Of course for burps only. The knob is a nice feature to have. ;)

[Cashdollar2009]

cashdollar, what rattle proofing do you having going on in your trunk

I have a regrettable Bomz Racing aluminum spoiler. Lol, but still on the hunt for a new lid so I don't have to worry about filling those holes. Some kid with a cavalier is offering me $75 for the wing, so it's his as soon as I get it off. ;) Oh boy I can't wait. lol... But no sound deadener whatsoever. Don't want to invest too much into stuff that will stay with the car because i'm hoping for a new vehicle in a year or two.

[AleroDrime]

didnt hear much coming from the back where the separate pieces meet, that place haunts my bass

[MattismodderX]

I have a regrettable Bomz Racing aluminum spoiler. Lol, but still on the hunt for a new lid so I don't have to worry about filling those holes. Some kid with a cavalier is offering me $75 for the wing, so it's his as soon as I get it off. ;) Oh boy I can't wait. lol... But no sound deadener whatsoever. Don't want to invest too much into stuff that will stay with the car because i'm hoping for a new vehicle in a year or two.

i got that boom mat acoustic spray and sprayed one can per side panel behind the drivers door to the side of the back passengers. that area used to make a lot of noise now it makes none

[Woodbury Alero]

Thats sick! how much did you pay for it and did you install it yourself?

[Chipmunk-Alero]

Lets say at least $1000 in just the DC Lvl 4 sub, wood for box, Crescendo 3kwp, and 1/0 wire. He also has 2 Deka Intimidators which are badass. So I really dont know how much it cost.

But yes he did every bit himself.