need to find exhaust tubing

[whiterider00]

so ive got my razzi kit on, and right now i dont have the money to have my header installed and the whole exhaust done, including the dual outlet. what ive been looking for is some sort of "t" to attach right after the muffler so i can route another piece of pipe to the other side of the car. i have not been able to find anything that would work. checked all the usual online stores (summit, jegs etc), checked ebay, and all the auto parts stores locally. does anyone know where i could find something like that? i have a feeling it would have to be custom, and im probly better off just dealing with the one exhaust outlet until i get the whole exhaust redone. it would have to be a 90* T 2.25" inside diameter. any help would be great. thanks.

[ccsmith87]

I don't believe they make a T, or at least in my adventures I have never seen one. You'd probably be betetr off just waiting until you do the complete exhaust so you only have to do it once and in the long run save yourself some money.

[Alerojester]

^^^^ X2

[whiterider00]

figured. just dont like the look of only having 1 outlet when theres 2 cutouts. guess i dont have much choice tho. lol

[Alerojester]

ok so have you thought about getting a transverse muffler, cause then you have duals off one muffler then the rest is up to how you want it to look

[pimpalero2003]

Should have y adapters don't know how good that'd work. Check autozone type places or jegs or something

[whiterider00]

as for the muffler, ive already got a borla universal muffler on there, and getting another one would require more money, and then id still have to get all the piping to get the dual exhaust.

and for the "y" pipes, ive checked everywhere, and the smallest length ive found is like 9.5 inches. and its barely 10 inches from the end of the body of the muffler to the edge of the bumper. so thats not going to work. ill just (try to) be patient and get it all done when ive got the money.

[pimpalero2003]

Could posb try and make your own if can weld or know someone to.

[Alerojester]

^ that's true and if you or someone you know has a cutting torch then you can fab something with some creativity. A buddy just did duals on his mazda for cheap and just cut a hole in the exhaust piping after the muffler and ran a pipe across behind the bumper to the other side with a bend and put a tip on it i wish i had a picture of it but i wasn't there when he did it.

[pimpalero2003]

I was saying cut 2.5 or what ever diameter and an angle get another pipe cut to a point prolly3" or better weld together then get an adapter from 2.5 or whatever u have to the 3"

[kwhauck]

I have a brand new single in dual out slp muffler i'll let go of pretty cheaply......

[whiterider00]

i really like the sound of the borla, or else id probly take you up on that.

[kwhauck]

me too, that's why the slp is brand new in the box.........lol

[pimpalero2003]

How much ya want for it even though really don't need it and just finished exhaust lol

[kwhauck]

$35 plus shipping.......

[whiterider00]

found this (http://www.summitracing.com/parts/SUM-642022/) on summitracing.com. all i need is a 90* elbow and some tips, and i should be all set. ill just have some stuff left over.

[whiterider00]

well, got the exhaust all finished. took 2x as long and wasnt nearly as easy as i hoped, but it turned out decent. just have to make a couple adjustments to get everything centered.

9355