Injectors

[02AleroEco]

So i had my hood open, cuz i had to add more washer fluid and was just checking the over fluid to make sure they are good.

And i noticed black, kind of like something leaking but half drying type color if that makes sense around my valve cover i believe youd call it. (02 Eco) But more so around my injector area. one and sort of the one next to it on the side near the belt and im suspecting that the o rings might be bad?

i can get a pic later if you all need.

But i was just wondering how to i remove the rail to get at the injectors so i can check the rings, because if i recalled correctly each injector has two of them.


Also an edit: i started the car a little while ago because i had to run downtown, it smelt like fuel. but it started fine no real hesitation. then the fuel smell went away

[Redog]

If you smell raw fuel, it's a leak, but it sounds like your running rich

[02AleroEco]

If you smell raw fuel, it's a leak, but it sounds like your running rich

okay, ill go with running rich first. how can i correct this?

[Redog]

Well there's a lot of things you can do, but until it's giving you a serious problem, I wouldn't bother.

Plugs, wires, O2 sensors, do Eco's have MAFs?, air filter all I can think of right now.

If you had a leak, that smell doesn't "go away" after a few minutes

[02AleroEco]

Well there's a lot of things you can do, but until it's giving you a serious problem, I wouldn't bother.

Plugs, wires, O2 sensors, do Eco's have MAFs?, air filter all I can think of right now.

If you had a leak, that smell doesn't "go away" after a few minutes

I dont know if we have a MAF or not, if we do it would be on the Throttlebody correct? but ill check those just so i know they are fine. Thanks for the input

[xXManwhoreXx]

cut out your cat and pop flames!