sway bar bushings

[irondiezl3]

do our cras have sway bar bushings in the front? i know we have links i see the bushings in the back of the bar i was wondering if the front had bushings also or just links?

[mfuller]

Yes, there are two midpoint bushings/brackets to secure the swaybar to the subframe, just as out back. Then you have endlinks to connect the ends of the swaybay to the lower control arm (in front).

[irondiezl3]

do you think the part number is same for the midpoint because i cant find any store that sells rear midpoint bushings?

[Cliff8928]

The front and rear are definitely different...

[alero_bmxer]

good luck i couldn't even find a dealership within 50 miles of my house that sells them and i need them badly.

[irondiezl3]

everywhere sells the front rears are impossible to find

[Cliff8928]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250714668372&viewitem=

That was less than 5 minutes.

I still have my originals out in the garage on the stock bar.

[alero_bmxer]

every dealership i went to said there was like 3 different diameter sway bars that the alero could have come with

[Cliff8928]

Yeah.... In the front..

I'm pretty sure the rear options were all the same diameter.. Just either hollow or solid. MFuller would know more than I would.

[irondiezl3]

with vin you can look up size most are 23.5mm so replacements are 24mm nobody sells 23.5mm but as far as rear go nobody offers them they are all listed for the fron swaybar but im assuming the fron and rear are probably same size