View Full Version : Fitting in aftermarket radio
spc2125
03-12-2011, 01:06 PM
the steel bar in the back left where the harness would go blocks the radio from going all the way back. anybody else have trouble with this?
http://www.aleromod.com/forums/attachment.php?attachmentid=9946&stc=1&d=1299206076
BoarderTy
03-12-2011, 02:33 PM
Yea I had the same prob
cherrington17
03-12-2011, 02:34 PM
I too, had this problem.
I don't any more.
leroBob
03-12-2011, 02:48 PM
Same boat my alpine HAD a problem but it fits also all the plastic got in the way dremmel can be your friend.
spc2125
03-12-2011, 04:38 PM
any solutions?
Alerojester
03-12-2011, 04:53 PM
i never had that problem with my screen at all it went in nice an smooth with no problems, but now that im going to get a DD idk i might have problems but im not sure as of yet
Ryan from Ohio
03-12-2011, 05:36 PM
Just make sure to make a clean cut close to the round bar and file the sharp stuff off BOTH cut ends. After the picture I put a ton of tape on it so it wouldnt cut into wires.
http://i38.photobucket.com/albums/e136/basstronics/Alero/101_0176.jpg
kROntast1c
03-12-2011, 07:04 PM
i had a problem, so i cut it out
Lucalare
03-12-2011, 07:11 PM
Follow Ryan's example, that way you can get the harness in well, but you still get some support from that metal piece.
Ryan from Ohio
03-12-2011, 10:01 PM
In hindsight I should of cut that lower section out also. I think I busted my last dremel cut off disk so I stopped.
spc2125
03-12-2011, 11:40 PM
In hindsight I should of cut that lower section out also.
the lower plastic section?
Ryan from Ohio
03-13-2011, 12:32 PM
The metal band. I cut a section out and not the other part.
spc2125
03-22-2011, 08:27 PM
thankks for the help
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/199632_1941337617696_1370109359_2224955_6254001_n. jpg
Ttop191
03-22-2011, 10:35 PM
the red, THE RED! I'M BLIND!
RisenequinoX
03-22-2011, 10:38 PM
spc where'd you get all that red shit
Cashdollar2009
03-22-2011, 11:56 PM
spc where'd you get all that red shit
Looks like he just painted the radio bezel red, then has some sort of red led's in there.
spc2125
03-23-2011, 03:09 PM
Looks like he just painted the radio bezel red, then has some sort of red led's in there.
just painted red radio bezel and shift bezel. it looks like the lights are red but its just a crappy cell phone picture. but the radio face has red lights and a blue screen.
i like it
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.