View Full Version : Signal Light Clicking
achie 7
07-05-2012, 09:30 PM
I currently own a 2004 3.4L Alero. And have recently been having an annoying issue with my signal lights clicking non stop even though I am "not" signalling to turn. I have spoken to a couple of mechanics and they told me to replace the hazard light switch behind the dash and that would take care of the problem. However after a couple hours of labor and 40 bucks for the part, it still clicks! Does anyone have any suggestions or know what I could try next? Because this is getting extremely annoying!
Thanks
Redog
07-05-2012, 09:54 PM
Call a local GM dealer.
Aleros were recalled for this, but the hazzard switch is the issue.
And a couple hours of labor? You take off the speedo bezel and it's right there :eek: 10 minutes, if that
achie 7
07-06-2012, 09:15 AM
But I have already replaced the whole hazard light part. And the clicking persists. Im wondering if the problem isn't in the wiring somewhere?
Shiwnath
07-06-2012, 10:01 AM
This might help:
http://www.grandamgt.com/forum/showthread.php?t=50126&highlight=clicking
I think you need to be a member to see the pictures though.
Alerojester
07-06-2012, 10:06 AM
This might help:
http://www.grandamgt.com/forum/showthread.php?t=50126&highlight=clicking
I think you need to be a member to see the pictures though.
correct you do
foxsdaddy67
07-06-2012, 11:38 AM
i replaced my multifunction switch and that fixed it when replacing the hazard switch didnt work
achie 7
07-13-2012, 11:07 AM
Is it a lot of a work to replace the multifunction switch youself?
redrider07
08-01-2012, 06:06 PM
I called the dealer, mine has the same issue and he said it expired. I actually called a couple of places and the recall is no longer in effect. I ordered the hazard switch and I am going to replace it! If that does not work, I will order a multifunction switch, but I heard you have to disable the air bags and stuff, and I think its a decent amount of work!
Pheros89
08-12-2012, 03:22 PM
I just fixed this on my car, pull the MFS (multifunction switch) and pull it apart and clean it with electrical contact cleaner, and then re grease all the parts with dialectic grease. Takes little time, saves you lots of money, and lots of frustration... Driving with a constant clicking is annoying lol
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.